Something failed with my Coolant temp Gauge. At cold startup it shows 260°. Then goes to about 300 if I had to guess. It didn't limp or no engine lights came on to make me think the computer so a high temp. Anyone with any thoughts would be helpful.
Recent convert to duramax , I bought my brothers 04 cc 3500 4x4. It has approx 80k for miles. My brother bought it new. We want to tow a 37' 5th. Wheel rv. Any suggestions on what upgrades I need to make? Thanks any info will be appreciated.
My E4OD in my 92 leaks after it sits awhile. check the fluid level before starting and it was about 3" above the full mark when I started it nothing showed on the stick. Wondering if this sounds like a check valve in a cooling line dumping back to the tranny then leaking. It looks like from...
Guys,
in your opinion, is rebuilding my tranny in my 2 whl drive a job someone can do at home with no previous experience. I was a millwright equipment repair tech. But not sure if this is a do it yourself project or does it require too many specialized tools, also is there machine work...
Guys,
in your opinion, is rebuilding my tranny in my 2 whl drive a job someone can do at home with no previous experience. I was a millwright equipment repair tech. But not sure if this is a do it yourself project or does it require too many specialized tools, also is there machine work...
I pulled the cap off of a IP I have sitting here to see how the fuel shutoff was and saw the cold advance solenoid. I couldn't see that the cold advance solenoid did anything. With no power on it I couldn't get air to go through the fuel overflow back to the filter. When I applied power it...
92 f350 2 whl drive. Went to the dump and the battery light on the dash says amps came on. Would go out on the way home then came on and was flashing. I got home, checked the batteries 14.7volts, alternator was putting out 14.3 volts. I had a fuel filter leak, so I went to auto parts store...
Guys, my 92 F350 front tank has a bad sending unit, the tubes are rusted beyond repair. I've checked parts yards and they are as bad as mine here in the rust belt. Anyone have a spare on the shelf they'd be willing to sell.
thanks
jim
Guys, I did a search and found alot of sending unit info and shower head info but I couldn't find anything on where to get the pick up portion. The part that the hold down ring on my front tank holds down. Mine was rusted at the return tube to the top of the fitting and it broke off when I...
It cranks cranks cranks then chugs like it wants to take off then cranks cranks cranks and chugs like a old carbeurated gasser. do it a second time then it will start. I've done glow plug controller, all new beru glow plugs carrier lift pump. its banks turbo wastegated, I haven't done the...
I put new beru glow plugs in and 2 new interstate batteries this summer. It takes almost 20 seconds the first time in the morning for the WTS light to go out. What do I check next. Its not starting real easy either and I did a electric lift pump and new fuel lines as well as return lines...
I'm looking for a line to build a pop tester, I'm open to suggestion as I don't know if I need a specific line or anyone of the eight. Let me know what you have and how much.
Thanks!
Jim
My gauge on my E40D starts at 140 and top is 320. When I start the truck it slowly warms up but pegs the needle out to the 320 or awfully close. I'm not pulling a load just heading to town. I pulled the dipstick and touched it, its only warm. So with that being said. My gauge, says RW...
I was checking my U joints and the tail shaft out of the tranny seemed like it had alot of movement to me. Should there be any noticeable movement in it or not. 2 whl drive.
Thanks
Jim
Can this be done in the truck or does the engine/ trans need to be pulled? Someone smashed my tube and the dipstick doesn't fully seat/go down the tube.
Thanks
jim
I did a search and didn't find exactly what I was looking for. I need a oil pressure gage, I'm not wanting to spend big bucks but I don't want the cheapest either. So with that being said, what do ya'll recommend for middle price good quality and are mechanical gauges better than electrical...
Question for anyone, in a tech article by oldbull on transmission flush you said it was okay to use the Mercron V and ford had updated it. But you were talking about a 4100R transmission or something close to that. Anyways is it okay to use in my E40D.
thanks!
Jim
So after all the work I've been doing to the truck. Fire it up as I'm flushing the radiator I see the tranny dripping fluid pretty quick, and it hasn't been leaking previously, the cork is crumbling and I tried snugging the bolts but they were tight. So when I called the parts store they...
So I put in a new champion 3 row aluminum radiator and put in the block drain/ petcocks. I've done several flushes and all I can get in it is 6 gallons. What would you recommend I do as I'm ready to add my 50/50 mix tomorrow.
thanks
jim
I'd previously asked if my Banks sidewinder was wastegated or not so here is some pics also of the carrier fuel pump with a low fuel level. Seems to run good, still cranking alot to start.
Hopefully this works
Jim
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.