Search results

  1. Bryce_Burden90

    new powerstroke owner

    Welcome to the PowerStroke diesel, I too just bought my first one here not to long ago, really like it (I guess I do even though the girlfriend kinda jacked it and won't let me drive it :rolleyes:) but seems like a nice truck. Sounds like you got a good deal on the truck, mine is a 2002 F350...
  2. Bryce_Burden90

    2002 IDM

    Okay I'll check them out after while
  3. Bryce_Burden90

    2002 IDM

    :rotflmao No I couldn't do that though, she's the only one whose been able to put up with me and I doubt I could find another one like her :D
  4. Bryce_Burden90

    2002 IDM

    The Edge Juice with Attitude is a plug and play system and has a monitor that gives you the capability to shift on the fly between 5 power levels, boss has one on his 01 Dodge and really likes it, but I've never seen one installed on a 7.3, makes a good amount of difference on a 6.0 though. H&S...
  5. Bryce_Burden90

    2002 IDM

    My bad, I meant a tuner, but said chip, sorry about that. I just need something that the girlfriend will pay attention to, she never seems to pay attention to the gauges in my Chevy, but maybe with a color monitor in front of her she'll pull her head out of her ass and pay attention to...
  6. Bryce_Burden90

    2002 IDM

    Hey guys, So here's the deal, the girlfriend been driving my 02 F350 back and forth to work past few days. She called me at 11:30 last night when she was getting ready to head home and said the truck wouldn't start. Went up there and hooked the scanner up to it and was showing IDM codes...
  7. Bryce_Burden90

    What Hand Cleaner Do You Use?

    I use Joe's Hand Cleaner or Fast Orange at the shop and they work well for me. I also carry around a bucket of those blue Scrubs hand wipes on my truck, they work really well out on service calls where there's no water. They also seem to work better if you add some water to the bucket with them...
  8. Bryce_Burden90

    oil?

    Okay, just out of curiosity, what years of the PowerStroke filter will fit the IDIs?
  9. Bryce_Burden90

    oil?

    Is that the number for the IDI filter or the PowerStroke filter, if its for the IDI then disregard my last post. Bryce
  10. Bryce_Burden90

    Help with injector removal

    I've got a set of small picks that I bought off the Snap-On truck the other day for this specific purpose, but before that I had a small pocket screwdriver that I bent the tip of at a 90 deg angle to hook the washer and extract it from the injector bore. Bryce
  11. Bryce_Burden90

    oil?

    You bet, I just looked in my records and the WIX # for a 6.9L is 51742, someone correct me if I'm wrong but I think the 7.3s use the same filter Bryce
  12. Bryce_Burden90

    oil?

    Can't remember the part number for the filter but a non-turbo 7.3 takes 10 1/2 qts of oil if I remember correctly. I run Rotella 15W-40 in all my diesel engines. Bryce
  13. Bryce_Burden90

    Hello All

    :rotflmao I know those pics were taken two days after I bought the truck, I have since put all new lights around it and the hitch didn't fare too well, tried to pull a Ford pickup with no front axle off of a flatbed trailer with it, and needless to say the hitch is no more:D, no big deal as I...
  14. Bryce_Burden90

    Pics of IDIs still working?

    :rotflmao no it gets trailered on a 37' gooseneck flatbed
  15. Bryce_Burden90

    6.5 pump questions

    Hey guys, I've got a 94 Chevy C2500 with the 6.5TD and automatic transmission. Only had to replace the PMD once but don't really wanna do it again. My question is (and I'm asking cause I've heard different people say different things), is it possible to swap an early 6.5 DB2 IP in place of...
  16. Bryce_Burden90

    introduction

    Hey Dave, I just joined up here as well, hope we both enjoy Oilburners as much as we do Diesel Place, welcome aboard.
  17. Bryce_Burden90

    86 GMC K10 Excab

    I had never heard of them either, nice looking trucks. As far as the exhaust goes, I'm running 3" single straight on my 6.2, 4" single straight on the 6.5, the 86 Ford running straight off the manifolds (exhaust fell off halfway home from where we bought it the other day:thumbsup:), and the 83...
  18. Bryce_Burden90

    Pics of IDIs still working?

    I don't have any pictures handy on the computer but my 83 gets used regulary hauling customers vehicles, my backhoe and other equipment, cattle, hay, and anything else I can throw behind it Bryce
  19. Bryce_Burden90

    Hello All

    Okay guys here's some pictures of my trucks, don't have any pics handy right now of the 02 or the 86, but heres a few of the 83 winch truck and one of the 94 and the 59. Bryce
  20. Bryce_Burden90

    Hello All

    Yes, and just worked out a trade of my 59 Ford for another 6.2 as well, I have owned several of both and never really had a desire for a newer one, the 02 was bought mainly as a tax writeoff for the farm last year:D
  21. Bryce_Burden90

    Hello All

    Yes the 6.0L was a mess all the way around. Thats when I finally decided to upgrade from an old IDI to a PowerStroke for my ranch truck I went with the 02 7.3, I had been thinking about the 6.0 for a long time until I went to work at this shop and seems like thats all we ever work on. I too have...
  22. Bryce_Burden90

    Recall notice

    Wow so according to the list my 02 F350 is under the gun here as well, wonder why I haven't got a notice yet unless it was fixed the first time. What do I do just call the local Ford dealer and give them the VIN number and they'll take care of it?
  23. Bryce_Burden90

    SON OF A B***H im really pissed

    Damn Benton that sucks wish i had a ZF-5 that would fit your truck, I'd gladly help you out but the only one I have the case is broke, kinda took a hard hit on a drunk night in a rainstorm on a bridge:eek: if you know what I mean. Sorry to hear about your tranny troubles, good luck on getting...
  24. Bryce_Burden90

    bad mpg's

    I never had the problem of returning fuel to the opposite tank on a Ford, but had a 79 K20 Chevy for a while that did that. Couldn't figure out why I got such lousy fuel mileage till i noticed out on a welding job one day that I had gas running out the filler neck of the RH tank :eek: glad I...
  25. Bryce_Burden90

    Hello All

    Just wanted to introduce myself here. My name is Bryce Burden. I'm a full-time mechanic and love the 6.9 and 7.3 IDIs. My daily driver is an 83 F350 Single Cab lwb dually with a flatbed set up as a winch truck, 6.9L diesel, C6 automatic. Some of you already know me from the IDI Owners Group over...

Latest posts

Forum statistics

Threads
91,263
Posts
1,129,513
Members
24,094
Latest member
madmustang1965

Members online

Total: 789 (members: 10, guests: 779)

Share this page

Top