Search results

  1. C

    7.3 idi parts

    Here is a list of the stuff: 2- E4OD inspection covers OEM auto shifter E4OD Shift cable E4OD lines from cooler to trans Turbo Flex Plate Factory Turbo oil feed line Factory turbo oil feed fitting Manual trans steering column fuel filter housing 2- starters auto trans tunnel cover Steering shaft...
  2. C

    7.3 idi parts

    Error, duplicate post
  3. C

    7.3 idi parts

    hey guys, I have some parts available that are leftovers from the recent work I have done on my truck (swapped engine and converted to zf-5). Some parts are from a 94 factory turbo engine, auto trans and other are from a 92 na 5 speed truck. Please let me know if you need something and I can...
  4. C

    Muncie hydraulic pump kit 92-94 idi

    When I bought the engine and trans I was told it was installed on a bucket truck. I assume it can be used for anything that can be operated with hydraulic pressure. Let me know if you are interested in it.
  5. C

    Muncie hydraulic pump kit 92-94 idi

    This is still laying in my garage floor
  6. C

    Zf5 swap and engine swap

    Yep, the left rear was leaking. I replaced the right rear as well just for good measure. As for boost the pump that is on my engine now is the stock pump from my original factory turbo engine. I have never turned the pump up or screwed with the wastegate. So you are thinking my boost...
  7. C

    Zf5 swap and engine swap

    Hey guys, I got the spongy brake thing resolved. My left rear wheel cylinder was blown out, so I replaced that one and the right one for good measure, now everything in the brake hydraulic system has been replaced. Next question, is what should my truck be making as far as boost? I got my...
  8. C

    7.3 idi engine shudder/miss

    Thanks for the input, I appreciate it. When I did a check for blow by the oil cap did not blow off while I was unscrewing it, I realize this is not a definitive test. I really don’t know much about this engine. I bought the truck that it was in for it’s zf5 parts. Out of necessity I ended...
  9. C

    7.3 idi engine shudder/miss

    Okay, what would that indicate if it gets worse or better with the intake hat removed?
  10. C

    7.3 idi engine shudder/miss

    Yeah it really does not sound bad in my opinion either. Like I said earlier the bb injectors don’t have many miles on them but the are about 8 years old. Not sure if sorting negatively affects them. The injection pump is the original pump from my factory turbo truck with about 182k, it did...
  11. C

    7.3 idi engine shudder/miss

    I don’t currently have a tester that will work on our engines. I only have the standard gas tester. The current engine has about 225k miles and I just re assembled it over the past few months. Nothing looked obviously screwed up, I don’t see any evidence of cross contamination of oil and...
  12. C

    7.3 idi engine shudder/miss

    Hey guys, I finally have my truck on the road after being down for close to 6 years. I am trying to figure out a problem I’m having with an engine shudder. My tail pipe shakes a little while at idle. When accelerating its noticeable, like a light shaking. It most noticeable around 2.5k when...
  13. C

    Zf5 swap and engine swap

    It’s part of my intake I made years ago. It was back when a bunch of people were running the hypermax cowl induction. https://www.oilburners.net/threads/cardana24s-air-intake-thread.42425/
  14. C

    Zf5 swap and engine swap

    Okay thanks, I’ll check those too. I re bleed the system again two nights ago but I have not had a chance to test them out again.
  15. C

    Zf5 swap and engine swap

    I got a chance to mess with the pump timing over the weekend. When I installed the pump with the engine out I set the timing just slightly advanced from the factory marks. When I checked the timing at 2k rpm it was around 6.5 degrees, I marked that position with white out. So I advanced it...
  16. C

    Zf5 swap and engine swap

    I got the brake lines finished up. I also installed a new master cylinder just because. Also installed new rotors/calipers/pads on the front. The truck moved under its own power for the first time in almost 6 years, it was a great feeling! I still need to bleed the brakes more and time the...
  17. C

    Zf5 swap and engine swap

    Still pushing forward slowly to get this thing back on the road. Once I got it running I had a steady oil leak coming down the oil filter. It was coming from above the filter but I could not see exactly where it was coming from, but it had something to do with the surfaces where the rear oil...
  18. C

    Oil leak down filter

    Yeah I made my own cowl induction intake. I did this years ago when the hyper max cowl induction kit came out. I am using a 4” aluminum tube, with couplings and the fitting I got at Lowe’s that is hooked on the firewall. I made a thread about it years ago. I’ll see if I can find it...
  19. C

    Oil leak down filter

    ....continued from the last post Here are the mounting surfaces of the cooler I installed. I used some form a gasket stuff on the gaskets this time as recommend by someone on this thread. Now it’s back together again. I have not added fluids so I don’t I know the outcome yet.
  20. C

    Oil leak down filter

    I finally got back outside and was able to move forward. I used a seatbelt on the exhaust manifold to lift the engine on the left side. Here are the block surfaces, I did not see any problems but I hit them with some fine grit sand paper and brake parts cleaner. Here are my two oil...
  21. C

    Oil leak down filter

    As for loosening the exhaust are you just talking about the cross over pipe? I can pull that down pretty easy.
  22. C

    Oil leak down filter

    I started this fun job this evening. I have the oil cooler unbolted but I have not been able to get it to come out. I have not removed anything other than the battery ground strap that goes to the bottom front corner on the left side. Any great tips? Should I just lift the engine? If so...
  23. C

    Oil leak down filter

    So I started the truck again over the weekend to try to pin point where it's leaking. I does not seem to be coming from the o-rings. Either I cracked the housing putting the engine back in or the seal between the rear header and the block is no good. I hope to get the cooler pulled out this...
  24. C

    Oil leak down filter

    10-4 in the oil. What year truck to you have? Did you leave everything in place when removing the oil cooler? Are you separating the tube from one of the headers before you try to drop it down? I only ask because everything I have read everyone is talking about lifting the engine/removing...
  25. C

    Zf5 swap and engine swap

    Thanks is man, yeah the interior is original. The seat was kept covered until I bought it. Thanks for the tip on lmc. I have the diagram that came with the set of energy suspension set I bought. The problem I ran into is that they assume you are going to be able to reuse your hardware and...

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,728
Members
24,098
Latest member
William88

Members online

Total: 361 (members: 3, guests: 358)

Share this page

Top