Search results

  1. turbonator

    6.5L DB-2 electronic??

    Hi, welcome to the forums.... Okay, short answer is no, they cannot be converted over to full mechanical, you are better off to re-sell them, and buy a good quality rebuild(with new head and rotor) or if you add a bit more $$$$, a brand new one,, if you so choose a longer more indepth...
  2. turbonator

    ARP Studs

    We are waiting on 6.2l-6.5l ARP stud kits as well; both head stud kits and main stud kits.... In the last year We have been burned a couple times by Sellers who show them in stock, and will even let us put them in our cart, pay for them, go through everything, then send a message saying there...
  3. turbonator

    Who all can mod a ATS/Factory Ford turbo... cheaply?

    Same thing with all the other turbos we have built and tried, have never balanced anything, although we have never had a cover cut larger, or clipped turbine wheels.... but i have built over 30 holsets and never had one explode due to balance issues...
  4. turbonator

    Who all can mod a ATS/Factory Ford turbo... cheaply?

    What size is the actual stock wheel to begin with? something like 54mm ind-78mm exd? I have always been under the assumption that if a 12 point nut is used the entire frame is built using component balanced parts, where-as a 6 point nut indicated it was spun up and balnced as a whole...Holsets...
  5. turbonator

    Interesting Stanadyne pump

    The first 2 years of the 6.5l turbo were mechanical pumps with .310" plungers, as well as all the g-van NA 6.5l(1994-1996), and subsequently every mechanically injected 6.5l humvee was .310" also... gm only used the .290" pumps on the 1982-1993 6.2l NA engines.... I was only using the .290" as...
  6. turbonator

    Interesting Stanadyne pump

    The DS4 pumps are actually quite different than a traditional 2 plunger DB-2 pump, they are closer related to a DB4 pump(4 .310" plungers versus [email protected]"), although the head is a larger diameter than a DB-2 and does not fit into the housings.... they are actual quite anemic,(even with the latest...
  7. turbonator

    Project: The New CDD Shop Truck

    subbed for fun, entertainment, and information....J&J....:cheers:
  8. turbonator

    My Turbo Tale

    We are very curious to see what you dyno. Thanks for posting up the link to the shop. We are close to Tremblant in Quebec, and need a couple new dyno shops. Our last dyno shop was in Richmond. Zekes in Lachine is closed now too.....J&J.
  9. turbonator

    Turbo talk

    have you tested your fuel pressure under load, still running with a mechanical lift pump? it might be dropping to zero, or even creating a vacuum, not good for the transfer pump in the IP... the measurements are all over the map for an hx 40, seems like its just the throat of the compressor...
  10. turbonator

    R&D idi issues?

    does he actually build all his pumps and injectors in house? its hard to farm out work to someone else and set definite timelines....just saying......J&J
  11. turbonator

    Turbo talk

    here is what banks is selling to the US government to soup up the humvees...LOL.... its funny, the kit uses the ford turbo even now...LOL...J&J
  12. turbonator

    Turbo talk

    they are all mitsubishi turbos, the early gm banks kits used Rotomasters(garrett), and the final kit for the gmt400 trucks used a te06h, which early on was a coveted upgrade for our platform.... the side mount banks were probably the best kit ever offered for the gm......
  13. turbonator

    Turbo talk

    unofficially probably has over 300WHP, in a 10,000lbs work truck with 3.42 gears, we beat our friends 1978 corvette with it, from stop light to stop light, but that isnt saying much with a late 70's smogger corvette, now if we put the engine into his corvette and built a turbo kit to match it...
  14. turbonator

    Turbo talk

    to bad you are all the way acrossed the country from us, we have built several custom turbo set-ups for the 6.2l/6.5l platform, and would enjoy the opportunity to tinker on a ford... check out of avatar pic, that is the current center mount kit we are running on our 3500 dually truck, needed to...
  15. turbonator

    Turbo talk

    the ford style VVT is not electro-mechanical actuated though, is it not? i thought they used a solenoid that used oil pressure inside the actuation housing with o-rings on the "spool valve" to pick its position..... but, they also used the sweet v-band connection, which is much better for tight...
  16. turbonator

    1991 suburban suspension question

    yup, the ole solid axle trucks were not caddies...LOL
  17. turbonator

    Turbo talk

    we have actuated the VGT with a push/pull spring set-up with decent results, others have done it with boost/ drive pressure and a pneumatic cylinder.... also on a side note, the cummins guys have found out the vgt units fail pretty quick if they are not water cooled as intended... wasnt there a...
  18. turbonator

    R&D stuff

    in the gm IDI world we are no slouches, been atter now for better than 10 years, and broke lots of stuff...LOL... always like like to see da bling-bling......J&J
  19. turbonator

    New To The Diesel World

    welcome to the board, mel is a good guy, and the members here will look after you... now, do you have an IDI, and an open line of credit with the shop...LOL...J&J
  20. turbonator

    R&D stuff

    we would love to see pics of these extra EDM'd ports if its possible, is there some over on the other site, or has someone already brought them here? anyways thanks for sharing this Macrobb...J&J
  21. turbonator

    6.5 1500 4x4 fuel mileage

    yup, also be prepared to swap in a known working PMD, and have a relocation kit to move it out of the engine compartment.... like towcat says, the economy of pretty much any diesel is connected to your right foot....J&J...
  22. turbonator

    Canadian Turbo Systems vintage turbo manifolds

    we have for sale 4 vintage CTS turbo manifolds that have never been installed (NOS) for the 6.2l diesel motors in the square body trucks and subs/blazers, asking 200.00 each plus shipping... same as the ATS ones, these are not made anymore , and this is the last of the old stock..... paypal...
  23. turbonator

    WTB 12 cm2 hx-35 waste gated turbine housing

    cool, thanks a bunch...
  24. turbonator

    WTB 12 cm2 hx-35 waste gated turbine housing

    any chance to look at it today? let us know when you check, and merry x-mas...
  25. turbonator

    WTB 12 cm2 hx-35 waste gated turbine housing

    check and see which it is you have, a 12cm2 is what all WH1C used.... should marked on the outside and the inside of the twin scroll housing.... if you want to sell it, how much? shipped up to canada, j0t1j0

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,728
Members
24,098
Latest member
William88

Members online

Total: 405 (members: 2, guests: 403)

Share this page

Top