Search results

  1. RustyBolts

    Looking for T3 to T4 Adapter Flange 1/2" thick.

    Workin towards putting a turbo on my JD 4020, and ran into a snag with my turbo. It's a Garrett/AiResearch reman, and the mounting foot is 1/2" shorter than the AiResearch exhaust housing was. It's also a T4 and the manifold is a t-3. 1/2" would be preferable, but I can make 3/4" work...
  2. RustyBolts

    Military CUCV 1008 Info

    So, after seeing a fleet of CUCVs go by my house he other day, they've piqued my interests. I'm looking to know more about them. I know this much so far: 1.25 or 1.5 ton running gear 6.2L Diesel TH400 Trans Dana 60 front axle GM 14 Bolt 10.5" Rear When was the earliest they came along...
  3. RustyBolts

    3" Downpipe Recommendations '94 Turbo Diesel

    So, dad's looking to upgrade the exhaust system on his Turbo IDI. He wants to start with a 3" downpipe, and go from there. He wanted me to ask you guys what a good choice for a downpipe would be, and where we could grab one from? Truck's a '94 Turbo Diesel F350, 2WD.
  4. RustyBolts

    Radio delay for older trucks

    I started chasing this rabbit after I bought my V10. As well you may know from my signature, it's a 2000 model. I've also spent many hours behind the wheel of dad's '04 5.4L truck. His truck has radio and accessory delay, where once you turn off the engine, the radio, and windows still...
  5. RustyBolts

    Air and Fuel system questions

    This 240D W115 of mine is definately different. It's the only Diesel I've ever seen with a butterfly valve in the intake. Behind the front butterfly, there is another one (barely visible) that isn't connected to any linkages like the front one is. There is also a "Jet" at the bottom of the...
  6. RustyBolts

    Likelihood of cracking the flywheel of a V10???

    PROBLEM HAS BEEN SOLVED
  7. RustyBolts

    Looking for W115 parts

    I am in need of ALOT of parts for my '75 240D project car. Most, I've found sources for, but there are a few that are proving elusive. First off; Does ANYBODY make repair panels for these chassis'? I need floorpans first and foremost, with a possible need for fenders and doors as well. Here...
  8. RustyBolts

    Looking for Ingersoll-Rand air compressor, with John Deere engine

    I'm on the lookout for an I-R compressor with a 219/239/276 CID JD engine underhood. Doesn't matter much what shape the compressor is in. Model # for engines could be 4219, 4239, 4276, 4036, 4039, or 4045. I know the 185 series uses these engines, but I'm not sure of any others.
  9. RustyBolts

    Question on ZF-5 Trans fluid.

    Brought home my V10 a couple weeks ago, and figured it'd be a good idea to change all the fluids. Looked in the owner's manual, and it said to use Synthetic Motorcraft ATF, and then it says this as a sidenote; "CAUTION: Using a transmission fluid that indicates a dual usage MERCON and...
  10. RustyBolts

    In need of 6.9L bellhousing for BW t18/t19.

    Buddy of mine's looking for one. I told him I'd keep my eye out for one. Figured if there was one out there, this was the place to find it.
  11. RustyBolts

    R12 to R134a Conversion

    Have any of you guys done this/had it done? I've got a 1980 F-350 that I want to convert, and was wondering what I was getting myself into. Am I going to have to replace the entire system (hoses, compressor, evaporator, condenser etc)?
  12. RustyBolts

    Any advice to anyone wanting to start pulling hot-shot?

    I've been considering doing some kind of towing/hauling for hire to help pay off my loans once I graduate college. While I'm here I'm gonna get my CDL. What all is entailed in getting prepared to do something like this?
  13. RustyBolts

    Thoughts on running a bypass oil filter. V8/V10 Triton Ford

    We have an '04 F-250 With a 5.4 in it. My dad has this bad habit of going 10k+ miles on an oil change. To prevent sludging up of the engine, do you guys know of any way I could put a bypass oil filtration system on it?
  14. RustyBolts

    Anyone out there have an Adam Horse, or Stock trailer?

    I went to QH Congress on Saturday the 23rd, and found myself looking at the selection that Armstrong Trailers of Salem Ohio brought out. They are a dealer for Adam Trailers, and I must say, I like what they had to offer. I'm just wondering if anyone on here has an Adam trailer, and what you...
  15. RustyBolts

    FS '96 Chevy C3500 Dually

    The one in my signature, and avatar. Has a front fender, bumper and brush guard to go with it. Rear fenders are in sad shape, has deer damage to the left front (thus the fender, bumper and brush guard). Damage is purely cosmetic, needs grille and parklights to fix. Engine currently has a...
  16. RustyBolts

    Question on PTO's

    I don't know if this is the righht place to post this, but I was wondering; Are add-on PTOs universal? I guess what I mean is, can I take the PTO off an SM420, and put it over on a ZF-5?
  17. RustyBolts

    Exhaust brake on an F-Superduty.

    We've got a late '91 F-Superduty with a NA 7.3L ZF-5 speed, and 5.13 Rear end. It weighs 10,240 with the 16' box empty. It gets loaded 4 days a week with up to 3 tons of garbage. With the hills in our area, (and the driver we have) the brake pads and rotors (front and rear) don't last very...
  18. RustyBolts

    WTB Cab and Bed for '73-'87 Chevy

    I'm Restoring my Grandpa's '75 C30 Cheyenne (Here's the Story on it http://www.oilburners.net/forums/showthread.php?t=41336) The Cab and bed are toast. Year of the bed doesn't matter as long as it's a 73-87. The cab I'd prefer to be 73-78/9. If anyone has one or the other in decent shape...
  19. RustyBolts

    Need Body Parts for a 73-80 Chevy.

    I have a truck that my Grandpa bought in the early '80's. The story behind it is this: Santa Fe railroad in Newton Kansas bought brand new in '75 a C30 Cheyenne SRW Chassis-Cab with a 350 and 4 speed with unit #106 assigned to it. While it served for Santa Fe it had a mechanic's bed with hoist...
  20. RustyBolts

    Needing Injectors for John Deere 2010. Dealer says OBSOLETE PART.

    One of our family friends has a John Deere 2010 Row Crop Diesel with 2 dribbling injectors. Carmichael's JD dealership says it's an obsolete part. He spoke to Northwestern Diesel, and Columbus diesel; they say the best they can do is re-tip them, but it would probably cost as much as it would...
  21. RustyBolts

    Check out this hitch setup!!!!!!!!!!

    Found this today as I was surfing the net. http://www.youtube.com/watch?v=VeI8aBtPgSw&feature=channel The name Electric Towing Hitch grabbed my curiousity, and I checked it out because I was slightly skeptic as I'm sure you all are by now. Just check it out, it's pretty neat.
  22. RustyBolts

    Gen VI 454 Questions (96-00 Vortec)

    I was looking through parts catalogs and such today and noticed something a bit odd. For all '95 and older engines, the distributor is the same part number for both Big and Small-Block Engines. For the '96 to '00/'01 engines, there's a different part number for the two. Does anybody here...
  23. RustyBolts

    I need a 5 Speed for a Ford FAST!!!

    Got a '91 F-Superduty with a 7.3L IDI, ZF-5 Speed and 5.13 Gears. Rear tailshaft bearing went out, and we don't have time to rebuild this one because the stakeside trash hauler needs to be back in service ASAP!!! Is there anyone out there in southern ohio, west virginia or northeastern...
  24. RustyBolts

    John Deere 1010 Diesel Dozer in need of different Glow Plugs: HELP!!! PLEASE!!!

    We've got a 1010 diesel Crawler here on the farm that is as handy as a pocket on a shirt, but it eats the John Deere GPs like candy almost. In the past year we've put 2 sets of JD GPs in it only to have them fail within 4 months. We've been doing without for a while and just using ether to get...
  25. RustyBolts

    What's the best of the 6.2L's

    Over Christmas break I traded a $200 worth of scrap for what was left of a 1988 K2500 6 Lug with a missing rear axle, and no engine. The main reason I wanted this truck is because it's a 4X4 with a 4 speed, and I believe 3.42 ring and pinion in the front axle. I've got a lead on a full...

Latest posts

Forum statistics

Threads
91,281
Posts
1,129,775
Members
24,099
Latest member
IDIBronco86

Staff online

Members online

Total: 805 (members: 7, guests: 798)

Share this page

Top