Search results

  1. SLC97SR5

    Help identifying a screw

    I found this little slotted screw in the back of my valley pan. I do not recall coming across any hardware similar to this while replacing my engine. My first thought is something needed on the injection pump but I don't see anything obvious missing on it. Any ideas?
  2. SLC97SR5

    Using 2nd gear with E4OD while towing?

    I seem to remember that placing the shifter in 1st or 2nd does more that simply causing the tranny to start off and hold that gear. I thought it did something to the fluid circuitry and was undesirable if really working the truck on a grade or when loaded up? Am I high in the night?
  3. SLC97SR5

    7.3 IDI-T Freeze plugs and install tool?

    I am in need of factory Ford/Motorcraft/Navistar stainless freeze plugs and the install tool or dimensions to make my own. Anyone have extra plugs or the tool they'd be willing to sell, rent or borrow? Thanks!
  4. SLC97SR5

    Coolant temp/Oil pressure gauge?

    Have you guys found a dual reading combo gauge for water temperature and oil pressure?
  5. SLC97SR5

    '94 IDIT runs rough, low power, nearly overheating after Moose IP

    My Truck in my signature is experiencing some strange issues. I have been experiencing rough idle, low power and oil consumption. Years ago I swapped out the OEM IP for a Moose pump and a fresh set of injectors. Last Septemeber I replaced the Moose with a Moose JR and fresh Conestoga...
  6. SLC97SR5

    '94 OBS door lock cylinder rod retainer

    Does anyone know where to find this piece? I've searched the net and can only find them sold with a new lock cylinder. ($30 on Amazon, $200 from the dealer) I tried the HELP section from Dorman and although they market a pack of them from 86-07 they are not the same. I will try the junk yard...
  7. SLC97SR5

    Instrument cluster grounds?

    My factory oil psi gauge has started to flick around and pulse with the vibration of the engine. I have replaced the oil psi sender and cleaned up the pig tail connector. I think a ground is at fault. I polished up the frame to cab ground strap on the passenger side as well as the EEC...
  8. SLC97SR5

    Fuel shut off solenoid sticking when hot?

    My Ford will not start when hot. It had this problem prior to the Moose pump and fresh injectors. The lift pump has been correctly replaced. All return lines were replaced along with POP tested BB's. The pump has been timed by me with a ferret to 8*. I have adjusted the timing both ways...
  9. SLC97SR5

    Overdrive inverter...how to lock out e40d OD?

    I need to lock out OD on my E40D. I need to have the transmission default to OD OFF when it is started and not be able to be selected on for a period of time. Any ideas? I know a company produced a unit that defaulted to OD OFF but all it took to cancel that was a tap of a button. I am looking...
  10. SLC97SR5

    Radiators-1994 7.3 IDIT E40D

    Long story short during a Moab trip the factory radiator started leaking from a pin hole caused by corrosion. I thought finding a replacement radiator would be quite simple and was actually suprised that Moab didn't have one in stock at any of the 4 parts retailers. I'm looking for a...
  11. SLC97SR5

    I FAILED emissions...horribly

    In UT the opacity limit (Visible particulate matter, black smoke) for Diesels is 20% I have the safety/IM test slips for the Truck all the way back to 1997. They indicate that the Truck has NEVER blown past 6.9% This was last year as the pump and injectors were begining to fail. January...
  12. SLC97SR5

    Funky/Odd Power Steering

    Returning home from a 1,000 mile trip with the family the Ford's steering wheel jerked to one side and as soon as I corrected, the steering felt overly sensitive for a moment, then returned to center. It freaked me out as I thought I had a rod-end or ball joint letting loose. I got off the...
  13. SLC97SR5

    FS: ATS 7.3 TURBO kit on KSL.com

    NOT MINE, no affiliation. Just passing it along... http://www.ksl.com/index.php?nid=218&ad=13998125&cat=&lpid=&search=ford idi FWIW, he was selling it for 300.00 a few days ago
  14. SLC97SR5

    Glass inline filter?

    Does anyone use an inline fuel filter prior to the lift pump or after the lift pump before the main fuel filter? I would like to use one to add an extra measure of safety to my new Moose IP. It would also be interesting to see how much crap it actually accumulates. Hook me up with a link...
  15. SLC97SR5

    Valve Cover Gasket reccomendations?

    It seems like a stupid thing, I have searched and did not come up with any info on valve cover gaskets. My passenger side gasket is leaking from the rear and dripping on the crossover tube. I am sending Mel my pump to be Moosed this weekend and since I will have the Turbo off I want to...
  16. SLC97SR5

    Constantly under boost?

    When driving unloaded for long stretches at 80+ mph my boost gauge indicates 3-8psi. Is there any damage or fatigue occuring while under constant boost? I have 4.10's,E40D and 265's so while cruising I am around 3k RPM's While loaded the boost gauge rarely dips below 10psi. Is there...
  17. SLC97SR5

    Serpentine belt / Idler pulley

    Last week I experienced an idler pulley failure which in turn rendered the serpentine belt unservicable and smoked the tensioner pulley. I got a new belt, idler pulley and tensioner pulley from NAPA. Upon installation of the new belt, the bolt used to secure the pulley and compress the...
  18. SLC97SR5

    Accessories-floor mats, bed caps...

    Where do you guys find your accessories? I'm looking for floormats, bug shield, bed caps, side mirrors, steering wheel cover, bumpers and other interior/exterior dress up items. I have found generic websites but I'm curious if there is a "Performance Products" type site for our Trucks. Thanks!
  19. SLC97SR5

    My 1994 F-350 4x4 CC TD

    Here is my new to me '94 F-350 4x4 CC TD Auto: It has: 3 pillar pod with; Transmission temp, Boost and Pyro. Brians Truck Shop E40D 2 Tru-Cool transmission coolers -- big difference in trans temp Dual 875CCA Interstates -- MTP65, averaging 4 years per battery ATS exhaust housing 3"...
Top