Search results

  1. B

    serpentine belt

    This might help, I have a 1994, 7.3, idi with air, and the belt I bought from ford fits good, the part number is JK6-1122 and it is a motorcraft part,
  2. B

    starts,stalls,no power

    Mine has a small tourqe screw, it is hard to see since it is at the top and points towards the back of engine, once you get the screw out, the cup part with the filter in it screws out, I think it was a 3/4 inch nut that is molded to the cup. I hope that helps you out, remember do not pull the...
  3. B

    just drove for free

    I ran for free from london ontario canada to alasaka last spring on used veggie oil, filled my 250 box right full with the plastic jugs that the oil comes in.I have a 100 gal service tank in the box now, where can I buy a sealed 12 volt tank heater. I am doing the same trip in april.
  4. B

    glow plug controler

    Thanks for all the info, I think I will replace all my plugs and then make sure all conectors are clean,thanks again. It won't happen today since we are getting a dumping of snow.
  5. B

    glow plug controler

    I have a 1994 f250 idi, I just bought new glow plugs for it and I was wondering if the controler has a senser in it that tells when the engine is warm that the plugs do not have to heat up.Or do they heat every time the key is turned on.If they heat every time is it a good choice to put a manual...
  6. B

    starts,stalls,no power

    I had the same problem with mine not starting very good and when it did, it would not rev up at all. mine is a 7.3 1994, and what I did was take the back of the injecter pump off and there is a filter in there that was pluged with crap, take 5 lines off the pump, loosen them off the injectors...
  7. B

    glow plugs

    ,I have a 1994 ford 7.3, and I would like to know a good plug to get that won't burn out in a few weeks.:dunno
  8. B

    Whats up with Diesel prices? What do you Pay and Where?

    I would sooner pay your price, it is $1.00 a liter in woodstock ontario, that works out to be $4.50 a gallon,a crock of shit if you ask me..
  9. B

    Tach issue.

    Mine was doing the same thing, an easy fix, just unscrew the old and screw in the new.
  10. B

    My first YouTube video! Glow plug test TEST VIDEO

    are they also ok to use 7.3 turbo, and what is the cost
  11. B

    clutch rattle

    Yes i went back to the solid center clutch
  12. B

    clutch rattle

    I have a 1994 f-250- 7.3-turbo-5 speed, all factory ford, except for the clutch, witch I changed in the spring, the dual mass flywheel got a very bad shake, and since ford does not have them anymore,I was told by a tranny shop in Texas to go the old style that the 6.9 had. The clutch works...
  13. B

    factory aluminum wheels $200

    just what I am looking for, but they would cost to much to ship to ontario, canada, thanks anyway
  14. B

    factory aluminum wheels $200

    are you selling or did ypu just buy them
  15. B

    zf fluids

    I had to replace my slave cylinder a while back, and it was a plastic one also,where did you get the metal one,I got the plastic one from a NAPA dealer.
  16. B

    zf fluids

    I just had it pulled apart and had new bearnings and syncros put in,
  17. B

    zf fluids

    I have a 94 f-250 diesel with the zf 5 speed,I just went to a synthetic lube in it,works great. It is called syncro shift 2,It is a synthetic gear lubricaunt made for modern munal transmissions,transaxles & transfer cases, sae75-w-80.It is made by BG gear.It is not cheep in canada,25.95 a quart
  18. B

    2wd Ford Alcoa Front Hub Caps

    If they fit a 94 250 4x4, I would be interested, I bought a set of brand new off e-bay to fit a 4x4, but they are for 96 and up, with a smaller axle o.d. they are to shallow and the hole is to small to go over my axle,If you are interested in these,let me know,I think we are in the same boat...
  19. B

    does an f250 have hub rotors?

    I have 1994 f-250 ,And I just put new on rotors on and they are separate from the hubs, I think that is what you are asking
  20. B

    Urgent Clutch Swap Gone Wrong

    I have a 1994 f-250 7.3, I also changed the dual mass,to the single mass,new clutch preasure plate and throw out bearing,after all of that,I had the same noise that you are having,so I had the tranny, out and rebuilt,all the gears were in perfect shape,I got new bearings and syncros put in ,it...
  21. B

    clutch rattle

    I have a 1994 F-250 diesel, I just replaced the dual mass set up with the solid fly-wheel, clutch, preasure plate,throw out bearing,new slave cyl. and master cyl. now I have a rattel when clutch is diss engaged, when I put preasure on the pedal, it gets a bit quieter, other than that the clutch...
  22. B

    tacometer trouble

    I am sure you are right about the sensor,it is not that much to replace so I will go that route first, thanks for the info. Beaver55
  23. B

    tacometer trouble

    I have a 1994 F-250 7.3 turbo,with a standard 5 speed,Is the tac. electric or cable, when the truck is running the tac. does not start to move the needle until it is around 1500 to 1800 RPM, any ideas. Beaver55

Latest posts

Forum statistics

Threads
91,282
Posts
1,129,777
Members
24,099
Latest member
IDIBronco86

Members online

Total: 986 (members: 8, guests: 978)

Share this page

Top