Search results

  1. geonc

    10k mod

    what Mike said ...I did mine---made the throttle a bit touchy so I went to 18k....didn't like it and went back to 10k then made an adjustable pot type all the way to 25k....too much work cause it will not start cold high up so you gotta remember to twist the pot back when you shut off etc...
  2. geonc

    Got some more done today

    Looking good there Zeke;Sweet Nice getting all the pesky little things done before it goes in the frame :hail
  3. geonc

    POP under the hood

    Dwight, I'm not one to ask as when mine went, I upgraded! Check the prices when you look at just the idler vs doing the dual idler ;Sweet
  4. geonc

    Clutch bolts

    Mel they are 5/16- 18 x 1 inch {or7/8"} flanged head/integral washer. ....I have a couple sets around because they come in both the LUK and SB kits. I'm sure I can round up 8 of them
  5. geonc

    89 to 93 conversion progress

    Some good progress there Zeke;Sweet re; the Getrag....you couldn't find a New Process:confused: Hey....that jack under your ZF looks alot like the one I have for my 4 wheelers LOL .....did you use it to remove the tranny?
  6. geonc

    Mel's vacation getaway

    aww...KISS MY GRITS Mel ;p LOL {WW hates that expression----:D :angel: }
  7. geonc

    truck looses power at 55?

    ;p thibbittt! For you guys unsure of what nomenclature to use....here is a prime example LOL Richard FYI---a "crescent" wrench aka thumb wrench, fits all wrench etc...has one fixed jaw and a moveable jaw operated by a thumb wheel.... A "BOX end wrench" is size specific, usually 12 point...
  8. geonc

    algae in fuel experiences?

    Heard that on the oil change underway ;Sweet Gotta agree with rumdum on the fuel manifolds....surprised they were not allready on her cookoo Far easier to valve one set off and the other on to change filters than shut down while under way. re:dry chem= Halon 1301? That stuff will itch...
  9. geonc

    algae in fuel experiences?

    If you did indeed blow the tip ----ANY liquid that is not atomized , such as water , alge etc...will blow the tip, dumping raw fuel not only in the cyl but washing down the liner and into the base oil diluting it. And no offense meant but those injectors are very finiky about what goes thru...
  10. geonc

    truck looses power at 55?

    Wrench size is 1- 1/4".. I kustomized one with a torch or you can get by with a 1-5/16". Be sure and use the 12 point box end..... the open end will have you -cuss -cuss -cuss hey Richard....how in the hell do you bend flat a crescent wrench? cookoo LOL
  11. geonc

    truck looses power at 55?

    You got it out didn't ya....use a screwdriver to "gently" move the flange back in place on the back of the pump...there is a small flange that seats and centers it to the pump.....then it's just a matter of contorting your finger under the turbo pedestal and thread it back in. You pull the...
  12. geonc

    ram air hoods etc

    IMVHO cowl induction not only looks better but gets cooler more dense air from the base of the windshield :D
  13. geonc

    ram air hoods etc

    linky Price is about $600 and of course truck freight will increase the price! 'nother linky $389 +$125 shipping
  14. geonc

    ram air hoods etc

    There are a couple manufacturers that make a reverse cowl hood--like the ones on the Z28's :thumbsup: .... I lost the link info when my system threw a 7 last year :mad: Contact Mel [Agnem] as if memory serves, he bought a hood for one of his rides.
  15. geonc

    Compressed Natural Gas System

    Isn't the purpose of adding propane to increase BTU's? And that in turn maximizes the combustion while helping to vaporise the carbon/soot keeping the oil cleaner.... As far as detonation, the only reason I can think of is exceeding cyl pressures :dunno
  16. geonc

    FINALLY put some new gauges in.......

    Not overly hard---the important thing is to take a very close picture of each dial with the ign on before removing the needles! Even doing that I still had to go back and tweak them. I got the reverse blue/white--white in daylight and blue backlighted. The kit comes self illuminated with it's...
  17. geonc

    Changing Clutch

    Talk to Peter at South Bend about up grading your slave cyl....Just replacing the pressure plate will put a different load on the existing slave and in the long run a possible failure. I got both slave and resivour for less than $100. re: the main seal....some "seepage" is expected but a...
  18. geonc

    POP under the hood

    ;Sweet Dwight! Where did you get the bracket? bone yard or stealer? That price seems out of line for both....but if'n it got ya runnin :hail Did you do the tensioner upgrade ?
  19. geonc

    only running on 4cyl

    YUP! IDI's do however suffer a similiar ailment....the steel lines from IP to nozzles will break off at the ends if the rubber line clamp blocks are not installed or are worn out!
  20. geonc

    only running on 4cyl

    I second and third that! here's a pic of what appeared to be a good UVC from the outside....eng had similiar issues as yours....
  21. geonc

    so wednesday was the last straw i guess

    HOLY SHITTTT! Count your blessings you are still above ground Jacob :hail Guess you got plenty of time to hang out here now eh :D :cheers: to a speedy recovery ;Sweet
  22. geonc

    Hoist

    I can attest to the strength of that one -----Mike had the eng swinging a couple days before I could get down there with my eng stand ;Sweet Mike's rig had a very smooth and even release valve too...wasn't one of those you barley put your hand on and BAM----the eng drops a foot :eek: -cuss
  23. geonc

    2008 IDI Weekend in pictures

    Sounds like I missed another great time........ Awesome re-count for us that were not there Mel ;Sweet
  24. geonc

    BUCK DIESELS

    OH YEA! I truly like the singular design and interchangeability of major parts! he seems to be using alot of alloy as opposed to cast iron as well, thereby increasing power to weight....even into the 600 hp range :hail Interesting long stroke/low rpm design...not to mention the...
  25. geonc

    hid headlight upgrades

    Been looking at them for my 4 wheeler and the '96. A couple guys I know are running them and they do look sweet! clicky here for link to supplier $66 {that includes shipping} for the 10,000k kit for the Polaris ;Sweet And the same price for the 9007's for the FORK :D here's a pic right...

Latest posts

Forum statistics

Threads
92,933
Posts
1,155,168
Members
26,436
Latest member
Studebaker62

Members online

Total: 1,038 (members: 3, guests: 1,035)

Share this page

Top