Search results

  1. kcwright1979

    Head Studs

    I have read the posts about using these and are aware of it. I thank you for the information :-)
  2. kcwright1979

    Head Studs

    I just ordered the arp ar7.00-LB with the washers and 6 pt nuts cost me 387.93 with tax and shipping hopefully I will get them sometime this next week. A big differance of 500.00+ for the kit.
  3. kcwright1979

    Mishimoto Intercoolers

    LOL I think so maybe 200 RWHP if I play my cards right, getting a wicked wheel 2 installed on my new ATS 093 (bought a new CHRA for it) with the 3 inch DP flange. Im not looking for for high boost numbers 10-11 max but in theroy the more cold dense air= more fuel being able to burn without...
  4. kcwright1979

    Mishimoto Intercoolers

    I am entertaining the thought of an intercooler. 1500.00 for a kit is out of the question, I want to keep my A/C intact so was wondering if anyone has used a Mishimoto universal intercooler, took the measurements and I could fit one in the brick nose...
  5. kcwright1979

    **UPDATE** FP DIESEL GASKET SET

    The head gaskets I pulled from my engine were metal with some type of orange sealant around all the passages, I pulled the heads for the simple fact that someone used autolites and had one swell up and stuck in the head. Its a good thing I did the #7 cylinder ate a glow plug didnt do any real...
  6. kcwright1979

    **UPDATE** FP DIESEL GASKET SET

    204.00 from NAPA
  7. kcwright1979

    **UPDATE** FP DIESEL GASKET SET

    So today I received my gasket kit and my thoughts on it are the head gasket is built excellent. has the International part # stamped in it (wonder if this is where they get them form. The head gaskets measure 0.086 thousands of a inch (don't know how thick other gaskets are) and the kit...
  8. kcwright1979

    WTR: ATS 093 turbo.

    I got a core if you need it
  9. kcwright1979

    FP DIESEL GASKETS

    I will find out in a week or so when I get them and update with pics
  10. kcwright1979

    FP DIESEL GASKETS

    From what I have seen was FP Diesel are from the Fel Pro company but the applications are for commercial purposes so hoping they are constructed better than the regular ones if I don't like the way there put together ill go with regular ones just exploring all options on the market for everyone
  11. kcwright1979

    FP DIESEL GASKETS

    So I have been doing some research and found there to be several companies to offer head gasket sets (Victor,Fel-pro,Ford oem, and international oem). I ordered the victors and when I got them they were horrible fire rings dancing around in the gasket and just not put together well, so I ordered...
  12. kcwright1979

    Emissions laws around Denver, CO

    Back in 2006 when I lived there I had to do a optic smoke test. They put it on a dyno hook up a hose to the tailpipe and run it. U were allowed 0% at idle and I believe 30% at running mine showed 1% at idle so it failed but the tech said gimme 10 bucks and it will pass so I did and it did. I...
  13. kcwright1979

    WTB: 7.3 pre chambers

    Sooo I called Diesel Cast Welding in MN. and they still do sell them 12.00 a peice so I ordered them from there :-) thier company in OR is really not customer service friendly in that department and was trying to quote me 25.00 per chamber if they did have them so if you guys do business with...
  14. kcwright1979

    WTB: 7.3 pre chambers

    I contacted him and he is unable to access those for me right now.
  15. kcwright1979

    WTB: 7.3 pre chambers

    Hey guys I'm desperate need atleast 6 useable pre chambers or 8 if it's a set I've exhausted all other options and diesel cast does not supply them unless you buy the whole head. This is the only thing holding up my build.. If I can't get them its new head time and I didn't want to have to drop...
  16. kcwright1979

    Now stocking Wicked Wheel for the IDI

    typ4 sells the new CHRA's for the turbos, brand new fully balanced ready to roll. I was gonna buy one from him but a local supplier sold me his last one for 400.00. I ran into that same problem no one sells the individual parts just new center sections I look back on it now I made the smart...
  17. kcwright1979

    Now stocking Wicked Wheel for the IDI

    Had anybody ran it yet? I would like too see where it spools up on the RPM range, and what other benefits might it hold.:D
  18. kcwright1979

    Who's looking for a turbo

    Here's one I seen on eBay non waste gated 088 http://pages.ebay.com/link/?nav=item.view&alt=web&id=111532793795
  19. kcwright1979

    WHERE TO PURCHASE A NEW CDR?

    There's a ford dealer on eBay selling oem ones I just paid 57.00 for it. Stamped with the original international part number
  20. kcwright1979

    Front seal installation tool

    U can use a rubber mallet to install it just make sure it goes on straight... It only needs to be flush with the housing
  21. kcwright1979

    7.3 harmonic balancer installation tool

    I was able to get a bite with the factory bolt.. Went on with little effort
  22. kcwright1979

    Turbo Option Opinions

    Btw I paid 510.00 for the turbo kit on eBay for got to add that :-)
  23. kcwright1979

    Turbo Option Opinions

    093 ATS w/wicked wheel swap and have your local muffler shop do a 4in straight pipe will get you where you need to be. The used ATS kits are pretty cheap and parts are still availble I picked up a compleate 093 with ATS housing and 3 inch DP my local turbo shop sold me a brand new garrett CHRA...
  24. kcwright1979

    Need 7.3 pre chambers

    PM sent
  25. kcwright1979

    Need 7.3 pre chambers

    Thanks for the info. I am goona check local junkyards and see what they have

Latest posts

Forum statistics

Threads
92,933
Posts
1,155,169
Members
26,436
Latest member
Studebaker62

Members online

Total: 1,108 (members: 11, guests: 1,097)

Share this page

Top