Search results

  1. kcwright1979

    Need timimg light adapter

    http://www.carpartkings.com/standard-ignition-fuel-injection-pressure-sensor-icp105.html $250.00 cheapest I've seen
  2. kcwright1979

    Need timimg light adapter

    It's called a pulse timing adapter. Standard motor products part# ICP105 new bout 300.00 hope you can find a used one or get ready to dig deep in your pockets.
  3. kcwright1979

    Fan clutch 2, me 0

    If all else fails a sawsall will be your best friend in cutting off the clutch best of luck to you
  4. kcwright1979

    Fan clutch 2, me 0

    Try a few good blows with a sledgehammer... I got mine off that way and my buddy's powerstroke they can be a B to break loose. Good luck
  5. kcwright1979

    WTB: Hypermax turbo pedistal 7.3 IDI

    if anybody has any and are willing to sell it would be appreciated.
  6. kcwright1979

    pyrometer install on 1987 6.9 idi with headers

    I put mine in the bend of the drivers side manifold super easy but some other people have put one inbetween the front two cylinders on the drivers side saying that's the hot spot of that bank... The choice is yours good luck
  7. kcwright1979

    wicked wheel on 093 kit

    Haven't ran it. blocks at the machine shop
  8. kcwright1979

    wicked wheel on 093 kit

    When I installed the WW2 I weighed them out and the ww2 was 1/2 a gram lighter than the oem wheel but it is taller and blade angles were slightly different
  9. kcwright1979

    For Sale 093 turbo kit

    I did not kinda of a gambler that way hahahaha.
  10. kcwright1979

    For Sale 093 turbo kit

    Bump
  11. kcwright1979

    For Sale 093 turbo kit

    I'm gonna run with the BWS360 turbo. It will burn all the fuel I can throw at it
  12. kcwright1979

    For Sale 093 turbo kit

    BTW I clocked the turbo for a intercooler install so it will have to be put back if u run it straight
  13. kcwright1979

    For Sale 093 turbo kit

    As it says I've decided to join the top 10% of IDI power houses and gonna go with a bigger turbo and keep egts down so I've decided to sell my kit it's a Garrett factory reman CHRA with brand new turbine wheel had the WW2 installed it's got the bigger exhaust housing and DP flange I cleaned and...
  14. kcwright1979

    ATS 093 Slip fit pipes

    I know that the original instructions say apply a generous amount of anti seize to the ends. I will try applying anti seize to the ends first and hope for the best that it will seal up.
  15. kcwright1979

    In need of injectors badly!! need help ASAP!!

    I got some that came out of my engine CAV BB injectors, truck ran when I tore it down, I can part ways with them. They are not new but will get you buy in your hard times pay for shipping and they are yours.
  16. kcwright1979

    ATS 093 Slip fit pipes

    I have been looking at those pesky slip fit pipes and know they can leak like crazy. I'm pondering at getting some V bands and welding them on to get rid of that weak link in the system.
  17. kcwright1979

    this is worth drooling over...

    Its really clean but the miles on it would make me nervous as a new engine is some $$$
  18. kcwright1979

    Hey You Guys!

    Welcome LOL LOL lots of great info from thousands here
  19. kcwright1979

    *FINALLY* My bulid is started

    Thanks Ford really hit n miss when you use quick reply
  20. kcwright1979

    *FINALLY* My bulid is started

  21. kcwright1979

    *FINALLY* My bulid is started

  22. kcwright1979

    *FINALLY* My bulid is started

    sandblasted with 100 grit aluminum oxide and painted my exhaust pieces with VHT flameproof paint. The oven curing process took awhile but hopefully its worth it and the stuff holds up got one more manifold to go poor ol' 30 gal compressor it taking a beating. I got a little delayed with sending...
  23. kcwright1979

    *FINALLY* My bulid is started

  24. kcwright1979

    *FINALLY* My bulid is started

    got the pistons coated with Cerakote v-136 Wicked Wheel 2 installed went together with no problems sits a little taller in the housing. this week the whole bottom end goes to the shop to get put together sleeved, balanced, aligned honed, typ4 cam, cant wait till its back...
  25. kcwright1979

    #1 Injector line Doesn't Line Up???

    That happed to me a while back when changing my IP just flex it from the end to fit and go slow so it does not kink and you will be fine if not I have spares u can have lol

Latest posts

Forum statistics

Threads
92,933
Posts
1,155,169
Members
26,436
Latest member
Studebaker62

Members online

Total: 1,107 (members: 11, guests: 1,096)

Share this page

Top