Search results
-
E4od delayed upshifting
He guys, Im having an issue with my 91 f350 e4od transmission that for the past couple days has been not up shifting as it usually would, its holding gears until about 2500 pm I can sometimes get it to shift sooner if play with the throttle a bit but still holds the gears for higher rpms than...- Archieb89
- Thread
- Replies: 7
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Slow crank
My truck has been intermittently cranking slow for a short time or not cranking at all and the starter will start clicking while trying to crank. I replaced both batteries and cleaned the cable ends and helped for a bit then started up with it again even though the batteries are reading good...- Archieb89
- Thread
- Replies: 21
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Torque specs
Anyone have the torque specs for both axle pivot bolts to frame and both radius arms to frame/bracket. I've got a 2wd 91 f350 drw- Archieb89
- Thread
- Replies: 5
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Electric fuel pump recommendations
Anyone have any recommendations for e-fuel pumps? I've heard mixed things about all the e-pumps out there as well as terrible quality mech pumps. I'll need a new fuel pump and I'd like to rid of the possibility of the mech pump diaphragm failing and pumping fuel into the crankcase, as well as...- Archieb89
- Thread
- Replies: 23
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Steering gear swap
Anyone here done a 4 bolt steering gear swap? I think they're 97+ then they changed slightly mid supre duty. I've read on some other forums guys with bricknose broncos bolt gears from 1999-2000 econoline vans right up. Ill be redoing all my steering linkages as well as a new box. Just wanted to...- Archieb89
- Thread
- Replies: 10
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Failing Injection pump?
Hey guys. My truck has been having a crank no start with extended driving. It doesn't seem to do it when I let it idle in the driveway even long after it reaches operating temp maybe just a slight hard start if I'd shut it down and fire it back up. But after extended drives, like going to the...- Archieb89
- Thread
- Replies: 15
- Forum: 6.9L IH & 7.3L IDI Diesels
-
A/C compressor oil and refrigerant
My liquid line to evap inlet was not holding and pressure so I'm re-doing most of my ac system. Everything but the compressor and condenser. The compressor is a replacement that the PO put in awhile back and it's a 4 seasons so I dont have high hopes for it but It looks like it's in good shape...- Archieb89
- Thread
- Replies: 16
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Banks turbo outlet size
Does anyone know the size of the turbo outlet on the newer gen sidewinder? I need to order a new coupler from the outlet to the intake hat. Mine is not sealing at all anymore i think it's just old and maybe shrunk a little but no matter how I put it on it doesn't seal right. I'd go back out and...- Archieb89
- Thread
- Replies: 11
- Forum: 6.9L IH & 7.3L IDI Diesels
-
7.3 idi with banks sidewinder leaking oil from intake hat
Hi everyone, I just bought my first idi last week. It's got the newer gen sidewinder on it. After it sat in my driveway for about a week I noticed some oil leak coming from what looked to be either the rear main seal and the oil pan as well as maybe the little drain tube between the transmission...- Archieb89
- Thread
- Replies: 24
- Forum: 6.9L IH & 7.3L IDI Diesels
Latest posts
-
-
How to measure valve stem to rocker arm pad clearance?
- Latest: 8769bigred
-
-
