Search results

  1. Hyde

    The never ending saga of my 6.9

    So in the typical style of my ol truck it has developed some more interesting issues. Occasionally on startup it will fire, spit and sputter then die. After 30 seconds or so of cranking it fires back up and idles like normal. It also has a pretty decent miss at higher rpms still. And the most...
  2. Hyde

    Cheaper "ghost tube"

    Yea you could get em a lot cheaper, only thing you would have to do is drill out the stud hole to 3/8
  3. Hyde

    No oil pressure

    I have a manual gauge, cheapie Autozone but manual
  4. Hyde

    No oil pressure

    Alright bad oil change, had too many guys workin on one truck. Anyway it looks like my truck is about a quart overfull, 10 quarts of 15-40 and one quart of Lucas. I have zero oil pressure at idle, or about 1psi but it isnt a whole lot. I had 15 or so at idle before the oil change. Could being...
  5. Hyde

    80-86 F-series Guage Mounting??

    Seein as the T-19 and C6 both end up at 1:1 I dont see why one would and the other wouldnt.
  6. Hyde

    80-86 F-series Guage Mounting??

    Flatlander is right, 75 was just cruisin down the freeway :sly
  7. Hyde

    Hi, this Ryan new here.

    Dunno if thats "built" but im not up for a debate tonight. Later ya'll!
  8. Hyde

    stereo wiring?

    Follow the old stereo wires as far as you can, cant be too far
  9. Hyde

    Better traction?

    No love for teh 16.5's. Not that im a huge fan, but they were cheap. So were the used tires I put on it after the ones that came on em wore out. So are military Goodyears....
  10. Hyde

    Lugnut headaches

    You wanna hear a lugnut headache, try not noticing the driver rear has reverse thread studs and nuts. Suckers musta been tight when I was done!
  11. Hyde

    Hi, this Ryan new here.

    Define "built" please. Welcome anyway!
  12. Hyde

    stereo wiring?

    Id do some more diggin for teh plug mang
  13. Hyde

    stereo wiring?

    Left Front (+) Green Left Front (-) Black/White Right Front (+) White/Red Right Front (-) Black/White Edit: All on are that link
  14. Hyde

    stereo wiring?

    http://www.the12volt.com/installbay/stereodetail/866.html
  15. Hyde

    Got my Alcoas but might have a problem.

    Much, with some 35x12.5s -Drool
  16. Hyde

    Got my Alcoas but might have a problem.

    Ahh now it all makes sense, some bigger meats would be very welcome on that thing
  17. Hyde

    80-86 F-series Guage Mounting??

    This is where I have my pyro, I wouldnt recommend it for a gauge that needs constant monitoring. Going up hills with corners equals frantically trying to find the gauge. The other three are under the dash in front of the 4x4 shifter if that gives you a picture.
  18. Hyde

    Got my Alcoas but might have a problem.

    No offense but why the hell would you lower a truck? The stacks could stand to come down a little IMO
  19. Hyde

    normally aspirated EGTs

    I mounted mine in the drivers side exhaust manifold. Acceptable, anything less than max which most say is 1250°. Only way to bring down temps is to give it less fuel, more air, or add water.
  20. Hyde

    6.6/7.8 Ford diesel ?'s

    Learned from these guys http://havanajournal.com/culture/entry/cubans_aim_for_florida_by_truck/
  21. Hyde

    6.6/7.8 Ford diesel ?'s

    Cubans made off with it somehow and tied 55 gallon drums to it for the float over?
  22. Hyde

    normally aspirated EGTs

    When pulling big hills my truck will hit 1300° pretty quick with no smoke so that isnt exactly a good indicator. I pretty much have to watch the pyro constantly, even a dead run from 0-65 empty will get dangerous.
  23. Hyde

    Headlight Switch?

    Cool deal glad ya found it
  24. Hyde

    Tech article for gauges

    Seems like a pretty good idea, most of em are pretty basic but it would be a good starter guide ;Sweet
  25. Hyde

    Headlight Switch?

    I had the same problem that had me running loops for a while, all it was turned out to be a messed up contact on the taillight bulb.
Top