Search results

  1. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Bro, it's worth a lot. I'm in a critical debate period for the next 36 hours or so. I'm gonna work on fiber-glassing my boat and new casting deck until I can make a decision. Ooh that Cummins is ever so reliable and she's just there for me, growls, screams, begs for more. I sure...
  2. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    AM I GETTING CARRIED AWAY??? Snapped a shiteload of pix. Haven't looked into uploading them yet or HOW. I pulled this thing apart and it's just SO pretty with nothing in there and so friggin crappy to get apart/together that I am considering a roll cage or exo-cage or just driving a...
  3. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Yeah man, if I got that Baumannator I'd be all set but it's pricey. I was just quoted $600 over the phone for it complete. I only paid $700 for whole engine with rebuilt inj pump, new lift pump, water pump, tranny, harness, PCM, etc. I got a very informative PM telling me about ability to...
  4. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    What's SRW???
  5. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Well, all good stuff to know. I just came inside to take a short break. I'm gonna make my own hoses if need be, radiator is not changing. I did this before with a Chevy diesel to gas mod. Stick galvanized pipe in between them (splice) or find hoses that fit. I called a j-yard in Lakeland...
  6. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Just found something very useful. I overlooked it before. Connectors C202M and C202F which correspond to the F and M engine codes. VERY similar, not exactly the same. I might actually just see if it plugs in right now... Not power it yet...
  7. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Great stuff again, THANKS!!! How could one get a diagram of the connector through-firewall for both years? I could get the engine running with just a few wires but I need it to shift too so I may stick with the stock harness... Don't want to...
  8. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Yep, got it. Just wondering what inputs the PCM needs to operate in this vehicle...
  9. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Ok. I think there are more sensors than that but you have covered them pretty well. There is an oil (pressure?) sensor on the turbo also. 2(?) sensors on the fuel filter. This isn't the exact diagram as mine is a 1994 turbo but it certainly leads me in a direction. Gauges and idiot lights...
  10. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Wicked!!! This is what I am looking for. Why are there so many sensors such as TPS? To give info to the module about the engine conditions regarding transmission shifting? Not sure about the dash stuff. Have to visit a j-yard. The tranny module and wiring is all there man. I can...
  11. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    The other plus is I can do veggie and WMO much easier with the IDI.
  12. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    Not to mention that the body style is the same. PSD has a huge ridge in one cylinder and with a 5 grand rebuild pricetag, well I went with the $700 IDI turbo with rebuilt tranny. ALL wiring up to the firewall is present. The only thing I will have to locate that I am sure of is a throttle...
  13. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    wtf? That's some way to answer a request for help. They are far from completely different. I am telling you, the plug looks the same. I'll have to count pins or something tomorrow. The exhaust appears to connect in the same place at the tranny, I have the whole harness, relay box...
  14. ne_plus_ultra_1

    Please Help Me Put IDI In Place Of A 'Stroke

    1997 F-350 was Powerstroke. Just today picked up my 1994 7.3 IDI turbo and transmission behind it, modules, harness and all. The connector for the firewall looks identical. Can I just plug it in or do I need to know something about incompatibilities???? Please help me! I want major...
  15. ne_plus_ultra_1

    Well, Where Would One Start?

    That's usually where I start. Often people will chime in on a forum and lead me in a direction which helps get me started.
  16. ne_plus_ultra_1

    Well, Where Would One Start?

    Oh, sorry that was unclear. I am specifically interested in information/kits for running processed WMO. My fuel pump is bad and most veggie conversions you have to use an electric pump so I assume it's the same with WMO...? Just trying to make a comprehensive plan.
  17. ne_plus_ultra_1

    Well, Where Would One Start?

    Isn't this a site at which people convert their vehicles over to run on processed waste motor oil?
  18. ne_plus_ultra_1

    Well, Where Would One Start?

    I gotta 5.9 and I would like to put together a complete plan for a conversion. There are just so many posts I don't have a clue what to look for to start learning. Can someone give me some useful links. I have a 5.9 and a 7.3 so either engine would be good. -ultra
View older results

Latest posts

Forum statistics

Threads
92,932
Posts
1,155,156
Members
26,432
Latest member
pwillis

Members online

Total: 1,713 (members: 2, guests: 1,711)

Share this page

Top