Search results

  1. C_Luft

    Question about intake hat and intercooler pipes

    I've been working for a plumbing company for about six months and I'm just about to start plumbing school. My question is would rubber hose clamp, more specifically a 4 inch by 2 inch fernco (rubber coupling) work as a intake hat And the intercooler pipes would be in abs pipe, I know it...
  2. C_Luft

    Oil cooler ???????

    The oil coolers on 7.3 idi and 7.3 obs powerstroke are the same but the caps on either end are different, so therefore the O-rings are the same, but hard to find where I live, only auto zone had them.
  3. C_Luft

    Oil and water Leaking out the intake/intercooler

    The oil cooler was the first thing I did to my factory turbo, mine didn't leak but it was a precaution I would strongly suggest replacing the oil cooler first before pulling heads,
  4. C_Luft

    A 460 vs. Towing?

    I would put a gear vendors overdrive behind the c6 and a fat transmission cooler and put synthetics in the drive train, straight pipe the exhaust and call it a day
  5. C_Luft

    94 460 mpg

    Try changing the intake manifold sensors water and air sensor , my 91 460 ran great with dirty sensors but the mileage went up when I changed them, the exhaust on these trucks are terrible take off the 4 ft muffler and anything else besides the catalytic converter( my truck passed deq with...
  6. C_Luft

    rebuild or repair

    The bolt spreaders definitely make sense now I was missing 3 ,, 2 on the oil dipstick support and 1 on the transmission dipstick support. My next question is, are the 2wd and 4wd E4od transmission lines the same cause the previous owner wrapped tape around a cut transmission line and it...
  7. C_Luft

    CDR Part Number

    http://www.fordpartsgiant.com/partlist/crankcase-ventilation-system-turbo-emission-reduction~1994-ford-f350-1898669-1901823-23839506.html ,, the cdr you want is the first item This is where I got mine, the cdrs are the same according to the Ford parts giant representative the grommets and...
  8. C_Luft

    rebuild or repair

    So I traced my problem to the valve cover it's dented in several places, how should I go about fixing it, no one has new valve cover and the nearest one is in Seattle
  9. C_Luft

    rebuild or repair

    So I changed the valve cover gasket and the cdr, the truck doesn't smoke as much from what I could see it was dark out, but I'm still getting the poof and engine hiccup But not as bad just more often I think I need to adjust the valve cover. But my friend said from the outside it sounds like the...
  10. C_Luft

    rebuild or repair

    Wow saw a few reviews ,1400 psi pop pressure on (rebuilt) injectors sounds like they cleaned them and didn't replace the springs, they definitely won't be getting my business any more, I have heard nothing but great things about moose misters and moose pump, my fault I wanted to get the cheapest...
  11. C_Luft

    rebuild or repair

    So ordered my cdr from ford parts giant 50 bucks and should be here in a week or so
  12. C_Luft

    rebuild or repair

    I have no complaints about performance of the truck just the noise (knock) it gets up and goes A LOT better than my mom's obs power stroke probably due to my straight piped exhaust including the aftermarket/custom down pipe that I didn't know I had, and the noise shows up when I'm just puttin...
  13. C_Luft

    rebuild or repair

    I looked on their site and found no reviews for the injectors, the truck did the same thing before I replaced the injectors, I think my next course of action would be a injection pump because there is oil coming from between the injection pump timing cover and injection pump, and it is also wet...
  14. C_Luft

    rebuild or repair

    Icanfixall I got the rebuilt injectors from dcpcart.com (diesel care and performance) and I haven't touched the injection pump other than tightened the fuel supply line from the fuel filter to the injection pump and I did find a receipt from Oregon fuel injection that the injection pump was...
  15. C_Luft

    rebuild or repair

    Sorry 79jasper was answering another question but it makes a sound like 1 of three things fuel knock, rod knock, or broken mount , it makes a sound from 1200 to 2000 rpm not at idle or above 2000 rpm, it could be from air getting into the lines cause the truck does leak diesel while running...
  16. C_Luft

    rebuild or repair

    On another receipt they came into the same dealer about a couple days later complaining about the transmission shifting bad and the dealer noted on the receipt the oil was high on the dipstick and on the transmission and they replaced the tps
  17. C_Luft

    rebuild or repair

    Yes I'm pretty sure it's coming from the valve cover because it's dripping on the exhaust manifold , and as I explained above when I would coast to a stop I would hear what would sound like a semi releasing his air brakes and then the truck would seem like it wanted to accelerate for a second...
  18. C_Luft

    rebuild or repair

    I agree on the cdr, that was my first thought when the valve cover gasket blew
  19. C_Luft

    rebuild or repair

    Hey everyone, I'm new to the site and a member at Fourdoorbronco.com, I got a couple questions I recently purchased a 94 crew cab 4x4 f350 srw with 7.3 idi factory turbo for 2700 When I first brought it home on the way back from Seattle to Portland it used a tank and half of diesel, 2...
View older results

Latest posts

Forum statistics

Threads
92,932
Posts
1,155,156
Members
26,432
Latest member
pwillis

Members online

No members online now.
Total: 1,698 (members: 0, guests: 1,698)

Share this page

Top