Search results

  1. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

    Ahhhh that makes sense! I dont think i would need a diode tho if i put in a relay. Complete mechanical disconnection from the circuit. My engine goes up to 240 during the summer if I go up some grades and stock fan with the shroud. It is going to be an experiment with the water evaporation...
  2. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

    Do you think 4 fans would be enough with a water evap system? Why do you need a diode? i would just use a relay. I have a 240a alternator. its pretty good. even at idle.
  3. Christian9112

    Cheap pyrometer

    That is a good find! Ill need to add this to my water meth setup
  4. Christian9112

    Fuel lines leaking... everywhere

    I have been looking for these hose. I cant seem to find them. Im bad at googling things. where can I find them?
  5. Christian9112

    7.3 IDI NA White smoke and misfiring on cold start and under load

    I only do it when I know there will be long up hills. it drops the egt from 1200 to 1100 (around there) at 50mph
  6. Christian9112

    7.3 IDI NA White smoke and misfiring on cold start and under load

    I removed the air filter last time I was in the mountains. It helped a little with the restriction
  7. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

    Im on van dwellers on FB. Theres actually a lot of van groups on FB. Theres skoolies e350s. I do use the truck as a work truck to carry all my tools tho.
  8. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

    Thanks. The fans would hopefully only turn on during traffic. which I do a lot here in LA. The fan modules are way too expensive for my taste. something like a $12 thermostat would do just fine for me. Here's the inside. WARNING loud beeps
  9. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

    5000 airbags rear. 4800 leaf springs. 1000 airbags front. Rear view dash cam. 400w rms audio system. Single din flip up screen for GPS. I dont have anything special under the hood other than the ebay 240a alternator.
  10. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

  11. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

    Here's what my fan setup would look like
  12. Christian9112

    fuel leak

    I have those same ones. I forced them all together. Bend the fuel lines properly and you can get it right.
  13. Christian9112

    7.3 IDI NA White smoke and misfiring on cold start and under load

    black holley pump does output as much as you say, but if you run it at 9 volts or so it can run at 6psi no problem. I have a voltage PWM. I can raise the voltage AND the pressure as I please. No matter how cold or how clogged the filters are, i get 6 psi. Flow rate does decrease as the filter...
  14. Christian9112

    fuel leak

    Also, I tend to think that when adjusting the timing at the IP, the lines get stressed and stays that way until its losen. It stays in tension and vibrates in tension. When I time my IP, I re-install the lines and bend them properly into the injectors. then clamp them all.
  15. Christian9112

    fuel leak

    Those lines are expensive. you can buy them individually here. https://oregonfuelinjection.com/product-category/ford-powerstroke/1983-1994-6-9-7-3-l-idi/?swoof=1&product_tag=fuel-system&really_curr_tax=17-product_cat&fbclid=IwAR2Zba6jqpTxeL2FunzaMMvm5LqjTax7yVXJC9BjjARINHuD5BudOO1ZruI
  16. Christian9112

    7.3 IDI NA White smoke and misfiring on cold start and under load

    Replace the stock lift pump and avoid the head ache. I have a class 3 ambulance. It also came with the smoke and hard starting. First i replaced all the parts that injected air to the system. Installed a black holley pump with adjustable voltage for pressure. Then replaced all the injectors. old...
  17. Christian9112

    FORD VAN- A Pillar Grab Bars for 94_e350_7.3

    There is no van section. most of the members are just truck owners. Me personally I put gauges on my pillar. grab the steering wheel like the rest of us lol
  18. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

    Its pretty late now. Im suppose to be awake for work in 2 hours. ill post pics later. I dont mind using my jigsaw to cut the holes. You wont see the jagged edges anyways. I will be tapping to the AC clutch and 1 ohm resistor. then a 200f thermostat for coolant sending full power to the fans. 210...
  19. Christian9112

    E-Fan/OE FAN Delete/CONVERSION/w. Serpentine Belt/3G Alt-94-E350-VAN

    I have an E350 as well. Looking forward to your results. I have planned to put in ebay efans. 3 different sizes. 17", 14", 2x 12" I have all the parts but I havent had the time to do the install. I also have a 220 amp alternator. Im thinking about putting in an extra water mister just incase...
  20. Christian9112

    Think it’s worth it

    Flip it. Rebuild the alt. And fix the calipers. $4-5k here in Cali easy
  21. Christian9112

    Renewable diesel?

    I've tried using hpr. It works fine on 7.3 idi
  22. Christian9112

    Truck ran great for 400+ miles yesterday and now won't start

    If you're smelling diesel something must be leaking. Last time I smelled diesel in mine, I found out that 1 of my injector line had a crack and spitting fuel to the valley pan. If your fuel filter was clogged, there's a chance that your schrader valve popped or anything else on the filter head...
  23. Christian9112

    Is there a way to upgrade leece Neville alternator to a 3g?

    That's all I needed to know to pull the trigger. Thank you. I want to install a high amp alternator that is good at idle. I'm going to install e fans and subwoofer system. Any suggestions?
  24. Christian9112

    Is there a way to upgrade leece Neville alternator to a 3g?

    I have this 1994 ambulance with a leece Neville alternator. It's leaking ac voltage so I want to upgrade to a more reliable one. The problem is the mounting. I've been researching this for quite a while and have not found any 3g alternator with this type of mount. If I change the mount, would...
  25. Christian9112

    Why does is smoke black if I time the injection too advanced?

    Ill get a manual. But for now, I'll set it at 4~6 psi. Thanks for all the info

Latest posts

Forum statistics

Threads
92,932
Posts
1,155,156
Members
26,432
Latest member
pwillis

Members online

Total: 867 (members: 4, guests: 863)

Share this page

Top