Search results

  1. ADV

    clutch bypass?????

    find the 2 wires that are the same color hook them together and you are set
  2. ADV

    1988 f450 parts for sale

    Those have been sold sorry.
  3. ADV

    BILLET ALUMINUM INJECTOR CAP PART 2

    No I am not willing to do that
  4. ADV

    BILLET ALUMINUM INJECTOR CAP PART 2

    I finally got the passenger side 4 caps on just came in from the garage. I will start the truck in the morning and see if I have any leaks. So the official start of the test starts now. My truck has 188750 miles on it and a full set of billet aluminum injector caps, new viton orings, and...
  5. ADV

    BILLET ALUMINUM INJECTOR CAP PART 2

    Thanks Russ! I will be sending out a little package tomorrow for you tomorrow.
  6. ADV

    BILLET ALUMINUM INJECTOR CAP PART 2

    Day one of testing 90 miles of driving so far everything looks good. I will keep an eye on them if anything happens I will be sure to let everyone know.
  7. ADV

    BILLET ALUMINUM INJECTOR CAP PART 2

    The truck ran for about 20 minuets Drove it around for half of that time and so far everything looks good. No leaks as of right now. After I have more drive time on them I will report back. JOHN
  8. ADV

    BILLET ALUMINUM INJECTOR CAP PART 2

    OK I finally took some time to get some of these on my truck its been so blazing hot here in WI is just was not motivated to got side and work on it. I envy you guys down south for your rust free trucks but I will stick to the salt belt for the usually not so hot weather! I have the 4 on...
  9. ADV

    40-20-40 bench seat gray

    I bought this seat out of a OBS extended cab F150 and was going to put it in my crew cab thinking it would be a quick easy swap. Well none of the holes line up and I just done feel like putting it in now. Seat is in nice shape no tares I will get some pictures up soon. $200.00 or make offer
  10. ADV

    Lifts?

    how much lift do you need to clear 37 inch military tires on a 93 f350? i dont mind if it rubs the springs am full lock and i am planning on putting a different bumper on.
  11. ADV

    90 DEGREE BILLET ALUMINUM INJECTOR CAPS

    This is something I would like to produce and sell after I get a good test on them to make sure they are going to work. I have not came up with a price yet. In a week or so I will report back to let everyone know how they work.
  12. ADV

    another use for baby daiper

    I needed to turn the fuel down on my factor turbo IP that I have on my NA engine and did not want to make mess with the fuel that was going to drain out if the IP when I took the cover off so I took one of my 2 year old daughters diapers and stuck it under the IP. It collected all of the fuel...
  13. ADV

    90 DEGREE BILLET ALUMINUM INJECTOR CAPS

    As much as i would like to make it to the rally its just not in the cards for me right now. I am getting low on vacation days from work, darn work always gets in the way of the fun! As of right now I have one extra 90 degree injector cap that has a small flaw in it if you want PM me your...
  14. ADV

    90 DEGREE BILLET ALUMINUM INJECTOR CAPS

    Here they are all together.
  15. ADV

    90 DEGREE BILLET ALUMINUM INJECTOR CAPS

    If you got nothing going on Saturday morning I am going to be working on putting these on my truck:sly Also was going to put on a new lift pump and a few other little stuff.
  16. ADV

    BILLET ALUMINUM INJECTOR CAP

    Just finished creating a program for a one nipple dead end cap.
  17. ADV

    90 DEGREE BILLET ALUMINUM INJECTOR CAPS

    The programming software I am using to make these is really cool it's kinda like an auto cad drafting program. If I can draw it out I can machine it. So if it were round or hex machining it would be that same once the program is set it would take just about the same time to make. The 90...
  18. ADV

    90 DEGREE BILLET ALUMINUM INJECTOR CAPS

    I had a little time at work last night so I made a couple 90 degree billet aluminum injector return caps. These caps take a bit longer than the straight caps. There is one machine stop so I can turn the stock in my vise to machine the second nipple.
  19. ADV

    BILLET ALUMINUM INJECTOR CAP

    I am not able to set up my machine to run over night I have to leave it clean for the day shift person. If they do go into production I will be making a setup fixture so I can just throw it on the table clamp it down and hit go then there would be almost no setup time.
  20. ADV

    BILLET ALUMINUM INJECTOR CAP

    What I was going for on this project was a nice cap with no joints to weld or solder so that way I should have no possible way of it leaking. As for the waste its really not all that much and the stock I am using will cost about $12.50 to make a full set of caps. The price would be the time...
  21. ADV

    BILLET ALUMINUM INJECTOR CAP

    Yes what he said. I have not thought about selling them yet, If they work out good I would like to sell them but this is a time consuming job! I am required to work a minimum of 46 hours a week and I would have to make the caps after work so these would be made in small amounts. I...
  22. ADV

    BILLET ALUMINUM INJECTOR CAP

    Thanks Russ PM sent The caps that I have made do have a taper to get the o ring to slide in and the part where the o ring will sit is straight.
  23. ADV

    BILLET ALUMINUM INJECTOR CAP

    I did see this. That's kinda what got me thinking about this project. Anyone know how they are working out for him?
  24. ADV

    BILLET ALUMINUM INJECTOR CAP

    I still see not big change in the cap in the oven and it measures smaller than the plastic cap in my freezer.
  25. ADV

    BILLET ALUMINUM INJECTOR CAP

    The used plastic cap I had in the oven has to come out I opened the oven door and its starting to smell of diesel fuel.

Latest posts

Forum statistics

Threads
92,932
Posts
1,155,156
Members
26,432
Latest member
pwillis

Members online

No members online now.
Total: 737 (members: 0, guests: 737)

Share this page

Top