Search results

  1. aggiediesel01

    Failed 26 year old original db2, what’s inside? What goes wrong?

    Can you show and tell about the torque screw and the leaf spring as well?
  2. aggiediesel01

    Need help

    here’s website that will create a list of wrecking yards in your area that have transmissions that should fit your truck when you fill out the web form. Be sure to select that you want a “non-interchange” part and select the years of ‘88-‘93 and diesel to get the correct transmission...
  3. aggiediesel01

    1993 8th digit M with turbo Canada made

    Looks like someone added the ATS 093 or factory turbo system to the truck. How about some wider shots so we can see the whole thing. That would help determine what you’ve got. Also scrub the block surface just to the drivers side and rear of the injector pump gear cover to get the engine serial...
  4. aggiediesel01

    Failed 26 year old original db2, what’s inside? What goes wrong?

    That’s really cool info Wes, thanks for sharing. My question is how on earth does the advance piston create so much wear? It moves back and forth as much as what, maybe 1/2” all while bathed in fuel? I get that the hardened chrome on the advance piston is harder than the aluminum and the wear...
  5. aggiediesel01

    Fuel selector switch broken?

    I don’t know why they are labeled for super duty. I don’t know of a single super duty that had dual tanks. The application notes show it for back to ‘87 and up to ‘97 which is correct. I think the ‘83-‘86 trucks had a different valve. The electrical connector and fuel line connectors are...
  6. aggiediesel01

    Fuel selector switch broken?

    The FSV use to be an expensive or problematic item to replace either because the OEM part is so expensive or the generic replacement option requires cutting and mating of new a electrical plug and replumbing of the existing lines. That is all in the past now. The aftermarket is offering a...
  7. aggiediesel01

    building a 1997 F350 cclb 7.3L 4x4

    Look at KC Turbo's S300 balanced assembly for your stock turbo and also their smaller A/R exhaust housing. The S300 balanced assembly comes with a rebuild kit and it makes the stock compressor perform about the best it can deliver. At a minimum get the smaller exhaust housing if you're going to...
  8. aggiediesel01

    08 front end converstion

    If you're still considering it, find the guys that are updating excursions to the new front clips. Some are bandaiding it together but many are swapping the inner fender supports starting at the firewall. I've seen a few threads on it in various places.
  9. aggiediesel01

    Ex Wife- my LONG term build

    I don't know about alcoas but a yard not far from where I am has a set of 4 eagle alloys in pretty decent condition. Obviously not this shiny anymore but this is what they are. At least one center cap is there, that's how I know they're eagle, but I don't remember if they all are. If you want to...
  10. aggiediesel01

    88 f250 saved from savage nature

    Here’s the little voltage regulator on the back of the cluster. It makes contact through a the series of basically wiper contacts so removing it and cleaning those areas would probably help it quite a bit.
  11. aggiediesel01

    88 f250 saved from savage nature

    A little note about the twin heavy yellow wires feeding the GPs. They pass through the main engine harness connector and are famous for over heating that connection and at a minimum melting or ruining that connector. I suggest that you at least disconnect and clean and lube the engine harness...
  12. aggiediesel01

    Any new fuel sending unit suppliers?

    On the sending units I've had, the steel portions were good so I ordered a couple Herko FC53-D Fuel Level Senders off Ebay and was able to unsnap the old bad ones off the unit and the new ones snapped in place with no issues using my existing arms. The replacement rheostat works for both front...
  13. aggiediesel01

    Hot Transmission

    I agree with the previous suggestions. Unfortunately in my experience, once the converter slips it's only a matter of time until it, at a minimum, has to be replaced. The converter and the pump are the heart of the trans, problems here get multiplied through out the rest of it. Caught early you...
  14. aggiediesel01

    Project WA5MOE 91 F250 4x4 IDIT Build

    Looking good Wes, we're excited about how it's turning out. I've got a bunch of irons in the fire right now but I'll try to get some pics and history of what else we've done to the truck up here over the holidays. How on earth are we going to keep that pump and turbo that clean and shiny?? On...
  15. aggiediesel01

    Howdy down in Houston

    Welcome aboard!! Good lookin' truck. Don't forget to put some details about it in your "sig" so that people who are answering questions know a bit about what you are working on. Looks like your truck may already be swapped to a D60 in the front? If so your already ahead on keeping the tires from...
  16. aggiediesel01

    Engine seal kit with turbo?

    Russ @typ4 from www.RussRepair.com has the only turbo gasket kit I’m aware of. It’s got all the gaskets and seals needed to install the 093 turbo. I think it’s even got the CDR to valve cover rubber too but you should verify that with him.
  17. aggiediesel01

    How to delete photos added to media album

    This question isn't exactly the same but since I started this thread I'll add another question I have. As a "Full Access Member" do I have the ability to add/upload files or pictures in a "conversation" with another member? I can see the button below to "upload a file" as a choice here in on...
  18. aggiediesel01

    What is the resistance of the wavy shunt on the GPR controllers?

    Use Ohms law to double check this. I think more power (watts) are produced by increasing the voltage but I don't believe the current drawn by the plug will go up since the resistance remains the same or approximately so once the plug is heated up. Of course the resistance will be changing with...
  19. aggiediesel01

    What is the resistance of the wavy shunt on the GPR controllers?

  20. aggiediesel01

    What is the resistance of the wavy shunt on the GPR controllers?

  21. aggiediesel01

    What is the resistance of the wavy shunt on the GPR controllers?

  22. aggiediesel01

    What is the resistance of the wavy shunt on the GPR controllers?

    How much resistance between the top and the bottom? You will need a micro-ohm meter to measure this small of a resistance. Is the metal ribbon made of a material that changes resistance as it heats up? All materials change resistance as heat is applied or removed but the goal of this component...
  23. aggiediesel01

    Looking for Some Sage Wisdom, 85 F250, 6.9IDI

    Check the seal on the cowl to the hood of your truck. If that's bad or missing it may indicate a possibly more serious issue. When they are missing or broken off rain water can pool on top of the air filter lid and then sometimes the water can leak past the center bolt down into the engine. That...
  24. aggiediesel01

    Dead e4od. What to look for first?

    If you can't find replacement and decide to take it on yourself, here's a post with some useful information and links that may help. https://www.oilburners.net/posts/1051198/
  25. aggiediesel01

    BILLET ALUMINUM INJECTOR CAP

    Any chance he'd sell someone (you) a copy of his CAD files and Machine code for good measure? Then they could be ordered to stock from a local machine shop with similar equipment.

Latest posts

Forum statistics

Threads
92,933
Posts
1,155,169
Members
26,436
Latest member
Studebaker62

Members online

Total: 1,056 (members: 4, guests: 1,052)

Share this page

Top