My opinion is that while the bw1356 may not be the strongest they do work just fine and it isn’t worth the driveline bill to fix something that ain’t broke
I have a bad bw1356 and I’m only seeing manual bw1356’s for sale around me that are out of obs’s aka doesn’t have what I need for the Speedo cable
I was wondering how hard it would be to convert a non Speedo cable t case to a Speedo t case?
This trucks first time with a front driveline!
Swapped the Dana 60 in a few months ago and then I just put a 4wd zf5 in today
And by the way for the guys saying that an 085 fits on a zf5 great with just cutting the ear off is lying I had a hell of a time with the uppipe
But thankfully I’ve...
Getting ready to do the zf5 swap this weekend, will be the second I’ve done in a bull I take alot of pride in keeping it looking original so I like to keep the right shifter, knobs, and boots.
But I like to change the inserts correctly but this is my truck that I care extra alot about and I...
So start with drilling the top 2 holes bolt the plate on then drill the rest?
I was expecting the dowels to be the same but no hopefully I can do that precisely
700$ 460 zf5 should be good all the things I want to see I saw to tell me it’s low miles even had paper work to prove it
Anyways bolt an adapter plate to it drill it out and from there just for all intensive purposes pretend it’s a diesel zf5? Diesel clutch fly wheel etc?
Looking for opinions here
I have a 2wd t-19 in my truck right now I just swapped in a Dana 60 and since I redid my turbo rolling at 75 even is over 10psi so it’s over drive and t case time
I have 3:55 gears and plan to keep them, I have the 5:1 t-19 and I love it especially the 5:1 first...
After I put the truck together after having the cab off getting everything right, and running awesome.
I’ve been able to focus on the smaller things like plate and reverse lights, horn, fully working power window and door locks
And I was able to get this kit to install keyless entry in it is a...
The solution to this is a bit embarrassing
So on the cruise truck there is a speed control amplifier and that is what the horn relay goes off of
As the horn relay is specific to cruise trucks
As on non cruise trucks 12v goes to one spade on the wheel horn pad sends that back down and to the...
I agree with the I don’t see how it could aswell genuinly lost
I also thought if I had the wrong relay aswell but it was mounted to the back of the speed control amplifier as described, the colors of the wires match, and the blue wire has continuity correctly
I’ll double quadruple check I have...
The wires to the horns are disconnected and it blows yes,
Also still blows when the relay is disconnected
Both circled things are grounds on the horn, I found that off but it works when hook up 12v
I am not getting 12v to y/Lb on the connector
Nor am I getting continuity to either of the...
updated for better format
*Horn fuse blows when I press the horn will never blow if I don’t press the horn
* fuse still blows even when the horn relay is disconnected
* no 12v to yellow/ LB wire in horn relay connector
* no continuity to yellow/ LG wire on the horn relay connector and either...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.