Looks incredible!
Bullnose’s read opposite so you were right ;)
Fed ex finally got us our rings, and back together the bottom end goes, even with 300k+ miles and a ball hone ring gap was on the bottom of the...
The front frame boxing is the rsk extension to run the excursion springs in the front, the rear of the frame has some additional Chanel riveted to...
I didn’t purchase the backup camera but maybe @theSHERPA remembers what the brand was.
Little sneak peak of projects to come!
Which o ring? The advance piston bore seals off the housing to piston fit, no o ring or seal since its under load from the injection cycles on the...
When you swap the problematic pump you should pull the 1" advance bore plug out of the passenger side of the pump, remove the cam pin plug on the...
[ATTACH] Went through the rotten cab mounts with an energy suspension kit, picked up a good inch of firewall clearance over the turbo and no...
Got my 225amp 3g kit installed, totally different truck now. Had to turn the regulator down with the fuel pump putting out more volume at the...
Just fuel on the 1xxx goal, my truck will always have a bottle
It’s this type of thinking that’s held these engines back... :sorry::D
Goals for 2021, I want to see all my customer projects completed, I would like to see one of my db2s make a four digit hp number on the dyno, and...
I’m a believer in, if it ain’t broke don’t try to fix it, but if you’ve noticed a drop in mpgs when you previously saw better numbers you’re...
Yes, and the adjustment is good for hot pumps where daily driving with 400+cc is not warranted, but needed when the Cummins bros need a lesson.
That’s very good, although turning the pumps fuel delivery up won’t have any negative affects for reliability, in fact you can often cheat a bit...
The lock nut has to stay to retain the o ring against the housing and seal the torque screw. Y’all can experiment with electric control if you...
[ATTACH] To add to my comments on rotor workings, here is a .310 rotor cut in half with an EDM machine. You can see the pumping chamber at the...
Yes, a steel sleeve is a cheap upgrade and a sleeved advance bore is the only way to build a reliable db2 anymore, the steel sleeve although an...
Here’s how the cam ring, cam pin and advance piston interact. As the advance piston moves in its bore it changes the relationship of the cam ring...
The torque screw basically is an adjustable stop for the metering valve, limiting how much fuel can get through the mv and into the charging ports...
They all get that way very quickly, in a matter of 20-30k miles, it’s the lowest point of the housing so contaminates end up in that bore when the...
Now we have a bare housing and head and rotor assembly, let’s talk about what went wrong here. [ATTACH] It’s evident that the advance piston...
Now for the last bit of disassembly, put comes the delivery valve assembly, very minimal wear here on the delivery valve and stop, these were...
With the rotor locks removed, we can start inspecting the heart of the pump, the head and rotor assembly. Looking into the head bore, we see some...
Separate names with a comma.
