Learn something new every day. Im going to call them
My head hurts.
As long as the the ratchet holds the adjustment in the proper direction they are correct.
The shoes are not arced to the drums...
Pictures and availability or I call BS.
And they are designed for Overhead cam engines when they are cut too much.
Nothing like a spacer plate
My IDI's dont like rotella, or to be more specific, they like it a lot. They consume no other brand except this one.
Get a free flowing exhaust on there and your boost may come up some also.
Before you pull that all apart jack up a wheel ,tighten up the brakes with the adjuster until the wheel is locked solid then you have to push the...
Going to the dealer for these trucks is totally a waste of time. Unless you need wiper blades. or a radiator cap.
Sounds like they gave you a 92 up cable.
And why do I have 14 years on a return setup and some guys cant get across the street????
Oh yeah, good hose and viton orings.
AND no screw...
Quote A turbo forces air into an engine. Forcing the piston down. Increases cylinder wear.
Bigger turbo is more wear and bigger injectors is...
I did not read this whole thread, the new delphis are junk, The stanadynes are definately sub par from the old days, thats why I quit selling...
Ran across this years ago some good info.
I've looked at a couple of those factory distribution boxes and they look very swap friendly.
Of course I figured that out after I bought a bunch...
It's odd the dash lights work in the tail lights don't because the tail light turns on the dash light in the top markers so check the specific...
Also the fuse holders on the wire ends are available. I have a bag of them, ,,,somewhere
Tear it clear down, metal gets in strange places.
Haul it up here , I have a clean spot. and gaskets
Brakleen works wonders for getting metal...
The 12-point bolts are grade 12 that's why they can take the higher torque.
and yes you can use a regular fine thread grade 8 bolt no washer use a drop of blue loctite, torque to 18 foot-pounds you'll be fine
If you have time for shipping I have new bolt kits for those.
I use hydrotex MTP ultra it's pink I can get the grade or a picture of the tube if you like I pack my bearings 14 years ago, 5 years ago I put new...
Thank you very much, he just messaged me he got it running. Finally got the air out of the injection lines
Separate names with a comma.