Frame on? Resto?

Garbage_Mechan said:

So on the vacuum switch... It is used on trucks with a vacuum brake booster to give a brake warning if vacuum is low. If I remember right you are converting to hydoboost. If so the vacuum switch is unnecessary for brake warning but could be left to indicate low vacuum in the hvac system if you wanted.

Click to expand...

aggiediesel01 said:

But remember, the dash light that turns on when vacuum is low is the Brake light and maybe the abs light as well?

On the DRL connector, the wiring diagrams show what signals go where and when they are energized so take a look at the diagrams before you wire them up. I believe you can buy that DRL module from rock auto for about $60 I've seen them on ebay for a little less but not sure if it would help with what you want to wire in.

Click to expand...

Ilovelamp said:

I would think it has power all the time if it is daytime running lights, but I'll check it.

Click to expand...

aggiediesel01 said:

Yes but the power might all go out when the running lights turn on. If I remember correctly, the module has some kind of reduced power output to run the lights at <100%. So the module might not be useful but knowing what was there and why will help you make an educated decision on how to use the wiring.

Click to expand...

Ilovelamp said:

Hoping to get @Thewespaul to finish it up for me, I've got alot of it back together and most of the parts except what he was going to build anyway, @Thewespaul , hit me up lol!

Click to expand...

Ilovelamp said:

@IDIBRONCO , damn that sucks but I work 70 or 80 hours a week, I just don't have time for a while, I'm kinda thinking about dragging up on this job and heading somewhere new so I was thinking I'll get out of here when he has time to mess with it, I really don't want to pay someone to pull my fifth wheel from Texas to Georgia lol

Click to expand...