A little different banks turbo

hce

So can i....
Supporting Member
Joined
Nov 10, 2009
Posts
1,072
Reaction score
329
Location
Glasgow MT (Official middle of nowhere)
Picked up a spare banks sidewinder turbo, and finally sent it off. Came back with a little different compressor wheel and a td06h center section. Adds some needed air to fuel. So far I like it.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

hce

So can i....
Supporting Member
Joined
Nov 10, 2009
Posts
1,072
Reaction score
329
Location
Glasgow MT (Official middle of nowhere)
61-62mm can't remember the exact number stated.
Turbocharger systems out of Oregon did the work.
It is cheaper then a replacement from banks if one needs to be replaced.
Pluses
Bolts right in no difference in dimensions other then the bolts for the drain flange go from 8mm to 10mm.
Parts for the td center section are more readily available then the te.
Get a little grin when driving it, it makes boost very quickly once above 1500.
negatives
Maybe a little less boost below 1500. Only noticeable in double overdrive.
A little louder when making boost.
 

typ4

Supporting Member
Supporting Member
Joined
Dec 24, 2005
Posts
9,093
Reaction score
1,372
Location
Newberg,OR
Sounds like about the same size wheel I've been putting in the TE's I found a good source for parts for them when they have them.
Ive talked to those guys if I could charge their prices I could retire.
 

camozzi2009

Blue oval
Joined
May 3, 2009
Posts
10
Reaction score
0
Location
Petaluma,ca
Sounds like about the same size wheel I've been putting in the TE's I found a good source for parts for them when they have them.
Ive talked to those guys if I could charge their prices I could retire.
Do you make compressor wheels type4?
 
Top