odometer reading?

Jimbanjer

Full Access Member
Joined
Dec 13, 2018
Posts
199
Reaction score
52
Location
Fingerville, SC
Well I went to get some measurements and noticed that both springs are missing the rear clip. I’ll probably use that U bolt idea for now! Also, what is this bar in front of the rear axle? None of my other trucks have it.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

nostrokes

Full Access Member
Joined
Oct 13, 2017
Posts
517
Reaction score
312
Location
Colorado
92 and up have a digital 6 digit odometer so unless it's been changed it should be right.

No the rear should not lift up when you gun it. Could be the big **** blocks you see or a bad set of springs/bushings.. overloaded will warp them fast. Try adding weight and see how it squats, my 88 f250 wouldn't budge with 1-1/2 tons of hay in it...
 

Jimbanjer

Full Access Member
Joined
Dec 13, 2018
Posts
199
Reaction score
52
Location
Fingerville, SC
I put those u bolts on the springs. Is it supposed to go over that bottom one too? It doesn’t look like the original ones did. Also, I think the odometer just has the first number hidden.
 

Jimbanjer

Full Access Member
Joined
Dec 13, 2018
Posts
199
Reaction score
52
Location
Fingerville, SC
xc_hide_links_from_guests_guests_error_hide_media

xc_hide_links_from_guests_guests_error_hide_media
 

snicklas

6.0 and Loving It!!
Staff member
Joined
Aug 7, 2006
Posts
6,164
Reaction score
2,342
Location
Greenfield, Indiana
Looking at all the black around the sides of the odometer display, and where the hundred thousands digit should be, I think the LCD is actually damaged. More than likely, given time, the entire odometer display may turn black.
 

Cubey

Van dweller
Joined
Oct 18, 2017
Posts
4,066
Reaction score
1,580
Location
USA
Well I went to get some measurements and noticed that both springs are missing the rear clip. I’ll probably use that U bolt idea for now! Also, what is this bar in front of the rear axle? None of my other trucks have it.

You must be registered for see images attach

That's what I did on the RV. I had to grind and hammer at the U bolt to get it to go around the leafs though since they weren't perfectly even on the edges and may have just been a hair too wide.

You must be registered for see images attach
 
Top