$50 plus shipping
IDI Parts
- Thread starter Thewespaul
- Start date
Kevo1288
Full Access Member
Alright Wes , putting together a list of stuff. Was thinking about picking one up to port match and searching for a set of heads from somewhere to port and rebuild over the winter so I can get a head start on my engine build for next summer when I can rock the summer ride and park the truck for a bit.
Kevo1288
Full Access Member
Not to keep posting @Thewespaul but do you have a set of heads?
I’ve got plenty, but I really don’t like shipping them. If I were you I’d keep an eye out for a parts engine you can pick up cheap
Alwaysreadyrob
2002 7.3 POWERSTROKE 4x4
wes, I need the fuel filter head also if you have an extra one lying around and also the dipstick bracket that holds the trans dip stick in place it bolts onto the valve cover bolts on passenger side ya ?
and also need the glow plug controller cover.
get back to me with what you have and a price list please.
and also need the glow plug controller cover.
get back to me with what you have and a price list please.
Is this the bracket you are referring to? The oil dipstick and trans dipstick bolt on separately, the trans bracket is welded onto the trans dipstick tube and bolts to the bottom of the valve cover, where the oil dipstick bolts to the top of the valve cover like pictured here
You must be registered for see images attach
You must be registered for see images attach
I should have everything else you need, just need to dig around and clean them up.
Alwaysreadyrob
2002 7.3 POWERSTROKE 4x4
yes that's the one that bolts on the valve cover.
10-4 I’ll get a list put together with some pictures and send you an email
Alwaysreadyrob
2002 7.3 POWERSTROKE 4x4
Also my fuel filter head uses the water seperator.
WarNose
Full Access Member
Do you have a good oil pump for sale?
I’ll dig around, did yours fail the tests or is it just peace of mind want to get a known good one? I’ll likely have to disassemble another core if I don’t have one on the shelf if you want a used factory one, or I can get a rebuilt oem unit.
WarNose
Full Access Member
The motor was dropped while I was buying it. The guy was loading it into my truck when his rigging failed. The motor fell about 3 or 4 feet and hit the ground. I spent so much time inspecting the block and crank for damage that I never looked at the oil pump. Well the front gear got bent, probably the shaft too. Luckily it didn't fall while it was over my truck.
Don't bother tearing a core apart if you don't have one on the shelf. How much for a rebuilt oem? How soon can you get one?
Thanks.
Don't bother tearing a core apart if you don't have one on the shelf. How much for a rebuilt oem? How soon can you get one?
Thanks.
Jimmy Stewart
Full Access Member
@Thewespaul do you have any working IPs laying around you would sell?
I’ll sell you a rebuilt pump, the service runs between $650-850 depending on what all the pump needs.
Randy Bush
Full Access Member
I did not realize the demand for IDI parts . I need to start parting out the stuff I have laying around.
