-
-
Yyotekiller replied to the thread Rear Diff Capacity.That code is 65 its a 4.10 rear no LS
-
Yfind the axle tag, should be located on one of the bolts on the diff cover. If it says 355 or 410 with an LS after it, then you have a...
-
Yyotekiller replied to the thread rear end identification.I will ck on the 75/140. Thanks
-
Yyotekiller replied to the thread rear end identification.I see 75/140 is recommended, dang i have plenty of 80/90 and a way to get it in the fill no problem.
-
Y3.25 to 3.5 quarts. 75/140 is what ford says to use.
-
YIt's the 10.25. The Dana 80 is 10-lug and would be an f-superduty truck. Buy a 5gal bucket of gear lube and a bucket pump. You'll...
-
Yfigured out i have a 4:10 rear, axle code was 65, so no limited slip. is there a way to tell if its a sterling 10.25 or dana 80. it is...
-
Yyotekiller replied to the thread Rear Diff Capacity.hey fellas, looking for advice 96 F350 i am trying to find out if 80/90 will work and how much or if i need some modifier in it, i do...
-
Yyotekiller replied to the thread fuel lines to fuel bowl?.just a update on that little task.. well first time doing it took me awhile needless to say if i had to do over again i would rather not...
-
Yyotekiller replied to the thread fuel lines to fuel bowl?.Well i would but purchased the flexible lines already, went to do.that job sat. Morning and the metal lines coming from the bowl down...
-
Yyotekiller replied to the thread fuel lines to fuel bowl?.nope its a 5 speed.. i found out it is the braided Blue and Grey fuel lines i need.. Thank you for your help and those on riff raff...
-
Yyotekiller replied to the thread fuel lines to fuel bowl?.got to looking the ones i need are the lines on the left side, of course these that are on it could be after market and not OEM metal...
-
Yyotekiller replied to the thread fuel lines to fuel bowl?.looks like those are the lines.. Thank you for the lookup...
-
YI think these are what you’re looking for. This picture is from Riff Raff.
-
-
Loading…
-
Loading…
