-
-
SNone that I can think of. Well there is one. You might have to loosen the injector lines on the IP. Once you do that, you can advance it...
-
Sseanres replied to the thread 6.9 IDI endless hard starts.That was my thinking, but that still leaves me more questions as to whats causing my issue if thats not the source. I have not checked...
-
STechnically yes, but that's still an excellent reading.
-
Sseanres replied to the thread 6.9 IDI endless hard starts.I finally got to testing it after having issues with a crappy Harbor Freight tester. Here were my results: 1: 400ish (forgot to record...
-
SMy compression tester for 6.9 fits in place of glowplug so no need to remove injectors, but fuel supply needs to be stopped, otherwise...
-
Sseanres replied to the thread 6.9 IDI endless hard starts.Got around to installing it. Fuel pressure at a constant 5 PSI at inlet between fuel filter and IP. I also tried running the truck...
-
Sseanres replied to the thread 6.9 IDI endless hard starts.Ran the truck today with ether, even with ether it was a super hard start despite the super strong cranking! Idled with a lope till it...
-
-
S@seanres - I would chase @IDIBRONCO's suggestion of a fuel pressure guage. Borrow one if you can... The things left on my checklist are...
-
SI feel like a fuel pressure gauge is a must have now. I recommend it to anyone along with a vacuum gauge to keep an eye on your vacuum pump.
-
Sseanres replied to the thread 6.9 IDI endless hard starts.I'll take a look this weekend. If I find that my $1100 rebuilt IP turned to junk immediately I will not be a happy camper
-
SThe next step might be to install a fuel pressure gauge to see what kind of pressure is getting to the IP. If you want to that is. I did...
-
Sseanres reacted to IDIBRONCO's post in the thread 6.9 IDI dies off throttle and weak at idle with
Like.
I'd lean toward that being a last resort. If it was me, I'd remove the front engine cover first. It's underneath the water pump. Others... -
Sseanres replied to the thread 6.9 IDI endless hard starts.So the new GPs seemed to help but I have run into another issue. On the 29th, I drove the truck again with the new GPs and found the...
-
-
Sseanres replied to the thread 6.9 IDI dies off throttle and weak at idle.I do not use the GP controller, I bypass it with a relay which is connected directly to the battery. I've checked the ohms of each glow...
-
Sseanres reacted to WrenchWhore's post in the thread 6.9 IDI dies off throttle and weak at idle with Like.
Ah yes I remember that thread. That's a bummer this is still giving you trouble. You say it had hard starts when you first picked it...
-
-
Loading…
-
Loading…
