rreegg's latest activity
-
rreegg replied to the thread Luk kit 07225 missing parts/flywheel.Obvious box is trashed. Not sure about flywheel though -
-
Unpacked a luk clutch kit 07225 which is advertised to contain a flyweel. First purchase from rockauto and appears they do not have a...
-
Turn it down 2 flats to start. That’ll be close.
-
Welcome to the party. I'm a NA type of guy myself, there's plenty of umph to do what you gotta do. Just don't be in a hurry, just chill...
-
You could just leave the turbo and turn down the pump. In any event just like going up in fuel go down slowly 1-2 flats at a time...
-
rreegg replied to the thread Throw out bearing noise?.The same part number for the Timken TOB - 614062 - is used for other makes as well like National and others. Timken was on backorder...
-
rreegg replied to the thread So what did you do with your truck today?.I just wear romeos and square toe chit kickers but wouldn’t mind more boots ;Really
-
rreegg replied to the thread Ball joints.Am still waking up but will you need an alignment again after ball joint work?
-
rreegg replied to the thread Update tapping noise.The comments on the youtube vid basically all say send it
-
I have the same noise in my. '89 and it may be the a lifter after much thought. Ill check mine and let you know
-
Harbor Freight sells the mechanic stethescope. Could just be an Injector making the noise. Have you loosened up each Injector line when...
-
rreegg replied to the thread Update tapping noise.
-
rreegg replied to the thread Testing 4x4.Getting close to dropping the t case for other work and it looks like there are signs the t case has been worked on in the past. Some...
-
rreegg replied to the thread Best Online Vendor For Parts.I use Napa for general things like filters and coolant, Oreilly for when needing something when Napa is closed, rock auto for bigger...
-
ok, started the soak last night. put 32oz of diesel clean in back tank with half tank of diesel. ran truck for an hour to get it good...
