-
-
Remember the o93 ats was factory set @3 psi, the non gated banks egt was the cap, I forgot what Gale set his wastegates at tho. But yes... -
pull the boot of the compressor side, the turbine wheel should be tight and rite as in literally no lateral movement (up down side to...
-
These turbos will have a little side-to-side movement at the compressor. But you need zero end-play(front to back). Grittiness or the...
-
On Sunday, I will be looking at a 1990 7.3 with a Banks kit added. This would be my first turbo anything so I have no experience or...
-
A once a month blow out is a good idea, by that I mean pulling a trailer or some hard driving up hills for several miles. I get hay once...
-
-
So, I was googling trying to find a PTO for my T19 and I finally googled it juussssst right and a post on "Ford Truck Enthusiast" came...
-
It's really grown on me, and its amazingly useful when you have hydraulics! I need to post on my "tow truck" thread the story of me...
-
PossumTruck replied to the thread Where's Possum Truck?!!.Man, I gave up on selling that thing and it went to waste due to space reasons. I couldn't have thought of a better home for it.
-
PossumTruck replied to the thread WMO and diesel mix in 6.0 PSD.Every once in awhile, this will not hurt you other than clogging your fuel filters faster. Running many gallons through this way would...
-
PossumTruck replied to the thread Wmo and IP timing.I advanced my timing a frog hair after switching to WMO. The engine became much clackier at cruising rpms; sounded like a knock. It...
-
PossumTruck reacted to u2slow's post in the thread Centrifuges- oil pressure type vs motor driven with
Like.
These centrifuges take out particles to a certain point. The oil will still be black and ugly looking. -
@Jesus Freak
-
-
Loading…
-
Loading…
