papadiesel
Latest activity Postings About
-
-
papadiesel replied to the thread Infant car seats in these dinosaurs...if you are concerned still, use center buckle and you can mount a used seatbelt behind the seat (single cab) and anchor through the... -
I've seen/used a piece of 2x4 inch steel tube, wrapped with a 9x11 sheet of sand paper as a quick diy resurface job. But you have to...
-
papadiesel replied to the thread Still possible to get a 6.9/7.3 4x4 for under $10k?.See, ultimately the thing is the ones that have been maintained by us who have had them for years are not willing to let them go, even...
-
-
papadiesel replied to the thread Thanks! (ATF in the fuel filter does wonders).And ditto on the timing, a must, not an option if you want best mileage and starting. Follow IDI tech articles.
-
papadiesel replied to the thread Thanks! (ATF in the fuel filter does wonders).Dude, beautiful truck, if you have a heart change you should get good bucks for it. Better speed and mileage would be change to an E4OD...
-
papadiesel reacted to Big Bart's post in the thread Rough idle, erratic shifting help please. with
Like.
Message Brian VT he found a eBay seller selling military surplus DTI units for $160. These are $400 new from DTI. I also suggest you... -
papadiesel replied to the thread Lines at Inj. Pump question.I have to chime in about controllers I’ve been working on them for almost 40 years the timing unit under the controllers are a big issue...
-
papadiesel reacted to Low1gear's post in the thread 1989 F350 4x4 front lower ball joints with Like.
As an old (70) retired ASE certified master auto tech I have noticed that young mechanics seem to have no knowledge of anything older...
-
papadiesel reacted to chillman88's post in the thread 1989 F350 4x4 front lower ball joints with Like.
My thoughts have always been if they want to argue about something like that I need to go elsewhere. I completely understand that I...
-
papadiesel reacted to Black dawg's post in the thread 1989 F350 4x4 front lower ball joints with Like.
My point wasnt about needing google to do the job or not, just sounded like he wanted to argue and he had no idea what he was looking...
-
Tried uploading a video but can't. Everything seems to be operating smoothly. So I guess pulling axles is next
-
A cleanly snapped axle shaft won't make any noise. With the cover off like that, the broken one will turn with the carrier.
-
Sounds you have catestrophic pinion failure. That's what connects the driveshaft to the differential gears. Pull the differential cover...
-
Meatloaf, Guessing you know but make sure you know the right cylinder chart. Ford is different than Chevy. Number 1 is closest to...
-
papadiesel replied to the thread So what did you do with your truck today?.Traced down wiring issue for instrument panel and running lights, bad headlight switch and blown 33 year old fuse (yep original)...
-
-
-
Loading…
-
Loading…
