1994 F350 7.3 idi turbo ZF5 swap
Recently truck had been getting hard to start when cold and excessive cloud of smoke when it eventually started. Then it would idle and smoke. When driving down the road no smoke in mirror. When I let off the throttle it will smoke again. Not burning any oil...
I have a 94 F350 SRW and when I did my swap I used the original front driveshaft which has a double cardigan and it cleared the crossmember but I did have to get the front driveshaft shortened and the rear lengthened
Been a long time since I have had a manual trans but I wouldn’t say that it is hard to push or hold down compared to any other truck I’ve driven. But like said above I don’t hold it down for long I just put it in neutral until I’m ready to go. I have heard that the south bend is very stiff...
Thanks to the help from some of y’all and the search bar I’m back on the road. Took first drive yesterday. I used a ZF from a 2wd F Superduty and got driveshafts shortened/lengthend. I used the crossmember from my E4OD that had to be slightly modified. New clutch pedal assembly and pre filled...
Do any of y’all know if all 2 wheel drive F Super Duty trucks with the manual trans is the 4x4 trans with the brake on the rear instead of the transfer case? Have a guy who has one but he insists that it is 2WD and won’t work for a 4wd. I tried explaining what to look for and I think he is just...
Well I did the ATF in the filter trick and let it sit a day. I started it up and drove the mess out of it. Hasn’t stalled out since. Thanks for the help.
1994 F350 7.3 IDI turbo
Recently it has started stalling on me but will restart without a problem. I first noticed it would stall when I let off the pedal and began coasting to slow down for a stop sign or red light. I then noticed that if I rev it up while idling in park and let off it will...
Thank you for the help. I have a line on a diesel ZF5 (Needs rebuilt) and one from a 460 That the seller doesn’t know condition. He removed it from a parts truck. Both here local. I think I’m gonna try and get both if the price is right.
I need to know if a ZF5 from a big block motor will bolt up to a 7.3?
I’ve used the search function and can’t find the answer. Seems like several have asked but some say yes and some say no. Does anyone have first hand knowledge? I’ve seen several say that the ratio is different for the diesel...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.