Luda-Chris
Reaction score
6

Latest activity Postings About

    • Luda-Chris
      Luda-Chris replied to the thread What new radiator to buy?.
      I was going to pull the trigger on a 4 core champ but wound up repairing my factory rad. Shop I used was called Active Radiator, I...
    • Luda-Chris
      Luda-Chris reacted to Kevin 007's post in the thread Walbro FRB-13-2 6-8 psi 43 gph with Like Like.
      So after a year of running the FRB-13 on an idi. I have had ZERO issues with it. I have it mounted on the frame rail with a spin on...
    • Luda-Chris
      Luda-Chris replied to the thread Fleetguard Red Coolant.
      I run Peak Fleet charge in my 92 with the brass rad.
    • Luda-Chris
      Luda-Chris replied to the thread E4OD blues.
      update- tone ring was damaged. I replaced it and it fixed the speedo. However, I still get the OD light coming on when I reverse...
    • Luda-Chris
      Luda-Chris reacted to Cubey's post in the thread Fuel filter, how tight? with Like Like.
      I've removed and reinstalled my RV's fuel filter 3 or 4 times over the last few years. I use a rubber strap wrench so no harm done to...
    • Luda-Chris
      Finally got around to replacing my radiator core support while I was waiting on parts to rebuild the rear end. I bought a Tru cool...
    • Luda-Chris
      Luda-Chris replied to the thread Sterling 10.25 blues.
      Same here. Little intimidating but it’s pretty simple stuff once you get started. I’m guessing the clutches wear down and no longer...
    • Luda-Chris
      Luda-Chris reacted to IDIBRONCO's post in the thread Sterling 10.25 blues with Like Like.
      I'm glad you found that problem.
    • Luda-Chris
      Luda-Chris replied to the thread Sterling 10.25 blues.
      The metal was from a clutch pack guide on the limited slip. Waiting on parts now.
    • Luda-Chris
      Luda-Chris reacted to Jesus Freak's post in the thread Sterling 10.25 blues with Like Like.
      My junkyard friend has a 3:55 I might get and redo, instead of messing with the 4:10. Whatever I decide, I'm going through the booger!
    • Luda-Chris
      Luda-Chris replied to the thread Sterling 10.25 blues.
      I’m able to get a good look at the pinion bearing and it’s intact. I’ll look again this week but I'm leaning towards a retaining clip...
    • Luda-Chris
      Luda-Chris reacted to u2slow's post in the thread Sterling 10.25 blues with Like Like.
      Maybe its metal shed from the pinion bearing? I would be changing all the bearings since you're in there. You may need to shim it...
    • Luda-Chris
      Luda-Chris replied to the thread Sterling 10.25 blues.
      There’s just too much metal to be from the worn bearings. The bigger piece is there is concave. Someone has suggested it might be a...
    • Luda-Chris
      Luda-Chris replied to the thread Sterling 10.25 blues.
      Certainly an option at this point. What a pain in the ass lol
    • Luda-Chris
      Luda-Chris replied to the thread Sterling 10.25 blues.
      This is the first I’ve been in it since I bought it a couple years ago. It’s obviously been neglected. What are the chances the pinion...
  • Loading…
  • Loading…

Forum statistics

Threads
89,484
Posts
1,095,795
Members
22,675
Latest member
52Deere70

Members online

Top