Recent content by David A Hodson

  1. David A Hodson

    building a 1997 F350 cclb 7.3L 4x4

    update to the up date had to go to FORD to get the clamp but it worked.. so I finished installing the air cooler and he's running a lot cooler and smoother now. tank selecting valve decided to go south on me and start sucking fuel from the front tank and return to the rear tank. Pulled the...
  2. David A Hodson

    building a 1997 F350 cclb 7.3L 4x4

    thought I'd give an update on the Knight's progress. while checking glow plugs we found #2 injector unplugged so we fixed that, put new high pressure oil lines from the pump to the heads on and added the steel crossover line. I've started putting the Early 99 Superduty intercooler on and wow...
  3. David A Hodson

    Anybody need the under valve cover injector/glow plug harness for an OBS PSD? (twin plug UVCH)

    Thank for and sorry it took so long to see an reply. I plan on checking into this deeply as I am redoing a lot on this old boy.. He's just turned over 300K
  4. David A Hodson

    building a 1997 F350 cclb 7.3L 4x4

    no thankfully he is a manuel transmission. Has the ZF 5spd. Thank to everyone who has replied
  5. David A Hodson

    building a 1997 F350 cclb 7.3L 4x4

    to give an update::: here's what I've gotten so far.. intercooler setup off an early 1999 F250 (waiting on mounting brackets and other hardware from CP Addicts) a set of baby swamps with very low milage from a trusted source.. sadly weather has turned nasty and my shop is too cold too work lol
  6. David A Hodson

    building a 1997 F350 cclb 7.3L 4x4

    sorry took so long too get back with you... built my own::: used a Bosch pump, 6.9L filter head (it uses a finer filter then the powerstroke) and a FAAS pressure regulator with custom bent steel line. still working out some kinks:: mainly fuel leaks < LOL
  7. David A Hodson

    building a 1997 F350 cclb 7.3L 4x4

    guys I would like some good options of building my engine, I'm wanting more power but don't want to go stupid crazy, I use this truck as a daily and as my work truck so I haul (pull a gooseneck) up too 20K payload. I want too intercool, do injectors but looking at keeping stock turbo with...
  8. David A Hodson

    Anybody need the under valve cover injector/glow plug harness for an OBS PSD? (twin plug UVCH)

    what all did you have too do to convert too the superduty harness, thought about doing that to my 1997 cclb
  9. David A Hodson

    93 F-250

    do you still have the truck Thank you
  10. David A Hodson

    1991 F250 7.3 no start

    Well I finally woke up and figured out the problem. After playing with it all weekend doing this test and that test we found out we wasn’t getting fuel from the tank so we used a clean diesel fuel can and a electric pump and it would run for a little bit. Couldn’t figure out why. Blew air...
  11. David A Hodson

    1991 F250 7.3 no start

    We have a diesel shop close so when the boy gets the cash we’ll pull everything and take it too them. Thanks for the offer though
  12. David A Hodson

    1991 F250 7.3 no start

    Wes I have at least 200 rpms and it’s a new lift pump ( I know it could still be weak ) I’m starting to think the inj pump is going out. I want to put all new stuff on with an electric pump.
  13. David A Hodson

    1991 F250 7.3 no start

    Wes To start it cranks fairly good with the charger on it. Yes the line from the filter to the injector return cap is still pinched off
  14. David A Hodson

    1991 F250 7.3 no start

    Nope not even on ether which is how I got it running earlier. This truck has been a real pain since he got it. It had sat for almost 10 years due to a bad lift pump
  15. David A Hodson

    Project: The New CDD Shop Truck

    Wes I would love to rip the powerstroke out of my 1997 cclb and put a built idi turbo in its place. Or find a cclb bullnose and build one for it
Top