Recent content by Csm Davis

  1. C

    Suspension rattle

    Also look at the actual sway bar mounts one of mine was bad and caused a similar sound. Sent from my SM-G900V using Tapatalk
  2. C

    GEAR VENDORS

    Had a 2 wheel drive long wheel base cowboy Cadillac F350 only used to pull race horses and second vehicle duty very well taken care of had T19 and needed overdrive for those long hauls. Got the GV installed at the factory in socal took a week for them to get the drive shafts right to their...
  3. C

    GEAR VENDORS

    Well my post count here has nothing to do with what I have learned in the last 35 years of turning wrenches or college. So almost every other option is better in my opinion the best idea would be to go with the over drive transmissions that are out there and can be had for the same or cheaper...
  4. C

    GEAR VENDORS

    Gear vendors suck, 2000 hp at what torque? Must be 2 or 3 foot/pounds.
  5. C

    GV carnage. very ugly pics.

    I had one do almost exactly the same thing on a 84 6.9 2 wheel drive that was not ever hammered on, on highway only and no overweight loads. It was installed at the gear vendors factory and they didn't want to send another one to there dealer to replace it but finally did after my lawyer sent...
  6. C

    Stock Alternator not sufficiant for my ride do I need a high output?

    Keep the one you have and add another one off of an ambulance brackets and all.
  7. C

    6.5 turbo w/mechanical injection

    Tanman that is exactly what I was looking for THANK YOU!
  8. C

    6.5 turbo w/mechanical injection

    Here's what I want to build. 6.5 Navistar block Good set of pistons? What rods? Forged custom crank Maybe custom cam? Best heads I can get? Think maybe IDI 7.3 TURBO and injection pump? Marine injectors? What intake? 3000 rpm max 250-300 hp will be plenty Things with question mark by them are...
  9. C

    6.5 turbo w/mechanical injection

    Yeah that's at the crankshaft and don't want a hotrod but just a good solid runner. I have many diesel trucks, around 25 or so, and a degree in Heavy equipment repair and maintenance. I just like the older mechanical injection systems. Yes I could go buy way more horsepower but not what I want...
  10. C

    6.5 turbo w/mechanical injection

    Sorry bud but 215 hp and 440 ft/lbs was a stock level for 3500s. So got to be able to get more than that.
  11. C

    6.5 turbo w/mechanical injection

    Thought these were at 200 hp to begin with?
  12. C

    6.5 turbo w/mechanical injection

    What kind of horsepower and torque can I expect to see out of one of these with a little work? 250-300 hp? Want a motor to tow and play with but no computer. Will be a fresh rebuild and willing to to do some internal parts to help with longevity.
  13. C

    detailing aluminum wheel cleanup questions

    What about the coated ones? I have some dually wheels tha the coating is coming off of. I thought about spinning them on the truck while on jack stands and using some wire brush or steel wool. Would a paint remover take the coating off? Then I could work on getting the scratches out and...
  14. C

    Just bought y first 6.0 loved my 7.3

    Sounds almost just like my 250 hope you enjoy it. sent from somewhere
  15. C

    Humvee 37s on F250

    Yeah I used 2" spacer adapters so I can just bolt on any humvee wheels that I have, I have them on almost every small truck and trailer I have. sent from somewhere
See more

Latest posts

Forum statistics

Threads
91,266
Posts
1,129,533
Members
24,095
Latest member
fummins124

Members online

Total: 464 (members: 10, guests: 454)

Share this page

Top