A
AndrewLinderman
Latest activity Postings About
-
-
AAndrewLinderman replied to the thread 7.3 idit build.Got the first fire today. Needs a lot more work.
-
-
AAndrewLinderman replied to the thread She swallowed a glow plug.I would just seal the whole thing. Front main, rear main, oil cooler, Etc. Might want head studs or valve springs if planning for...
-
AAndrewLinderman replied to the thread 7.3 idit build.Any tips on checking oil pump for if it is still viable?
-
AAndrewLinderman replied to the thread 7.3 idit build.Fancy
-
AFeels good when it spins great
-
AExcellent. I just got my rebuilt Perkins A4 off the engine stand Saturday. Such a great feeling to put an engine back together.
-
AAndrewLinderman replied to the thread 7.3 idit build.Alright guys. Piston rings came in and now the pistons are in. Everything spins great. Finishing short block maybe tonight. If not...
-
-
AAndrewLinderman replied to the thread 7.3 idit build.Alright. The intakes are probably the ones close and exhaust needing about .09 of shims each
-
AAndrewLinderman replied to the thread 7.3 idit build.Alright. So measuring valve spring seating for shimming my comp 910 valve springs. Which one is the intake and which the exhaust? One...
-
-
AAndrewLinderman replied to the thread 7.3 idi turbo piston rings.The problem is those are not keystoned top ring. I am not able to find keystoned top ring for the new pistons.
-
AI need rings for my new pistons. I bought some rings that were not keystoned not realizing I need a top ring keystone. the pistons I...
-
AAndrewLinderman replied to the thread 7.3 idit build.I got great clearance with the new rod bearings I picked up. The not keystoned rings I had were not able to fit in the groove on the...
-
-
AJust going to throw this out there. You will be better served using a micrometer for these measurements. Good quality calipers with...
-
AAndrewLinderman replied to the thread 7.3 idit build.Well I have found that I need keystones top ring for the new pistons. There is only 2 brand available. The wrong ones are the engine...
-
-
AAndrewLinderman replied to the thread 7.3 idit build.I think I need a keystoned piston ring and I bought the non keystoned
-
-
Loading…
-
Loading…
Latest posts
-
Question Re: Buying A Diesel Vs A Gas Truck
- Latest: ThinkingDiesel
-
-
