Tow and Haul RV transporter build

[tonkadoctor]

Now for the fun stuff.

Casualties today

1. - Hole Hawg ate my brand spanking new 1/2" Dewalt drill bit.... Thankfully on the last hole for the shock mounts.

You must be registered for see images attach

2. - Yea George..... Yer da one dat didit.

You must be registered for see images attach

3. - Light duty gantry gave up when we did something with it it wasn't designed to do....... lift the back of the truck frame OOPS.. well we were using the cherry picker too at the tail but evidently not enough.... Worked fine until HE decided it would be better to lift with both chains moved inboard... so I'll blame that on him too . Nobody hurt, nothing but a wooden board broken.

You must be registered for see images attach

 

[Russ]

Looks great Mike, and I looks like you guys are havin' some fun too.

 

[tonkadoctor]

Looks great Mike, and I looks like you guys are havin' some fun too.

Thanks, That's all Georges fault too

Almost forgot, he worked so ******* a really dirty part of the job today I let him have 2 samiches and a couple cups of coffee....... Before, sending him packing,......err....laying him off again till after the Holiday.

P.S.

I'm holding the Hole Hawg ransome until he pays me for all the hard work he's put in.

 

[haulin rv]

Found ya. Nice build!! BTW the other site has been shut down.

 

[geonc]

Thanks, That's all Georges fault too

Almost forgot, he worked so ******* a really dirty part of the job today I let him have 2 samiches and a couple cups of coffee....... Before, sending him packing,......err....laying him off again till after the Holiday.

P.S.

I'm holding the Hole Hawg ransome until he pays me for all the hard work he's put in.

Well...I only brought the Hole Hawg ...if I had brought that 40 year old Souix that weighs 30 lbs with double reduction and 450 rpm with a 18" long switch handle...that was the armbuster I was talking about

Yea..I pooched the bit...;p .....keep this up and I will turn that thing into a low rider ;p;p

Looks great Mike, and I looks like you guys are havin' some fun too.

Like I told Mike....Hire the handicapped---we're fun to watch

Seriously....the rear tied back in sweet!....just about dropped a nut rolling it up from the dirt onto the concrete pad tho
I just wanna see that new driveline in and track straight going down the road

I'm gonna let Mike fiddle with the brake line extensions etc.....till it's time to cut the 8 deg beaver tail and weld up the deck and stinger and 5th wheel mount.

 

[Russ]

Whadda matter geo, don't wanna work in the snow?

 

[geonc]

Whadda matter geo, don't wanna work in the snow?

Got laid off ...again! ...mebee I should join a union

hell..the only snow we saw was a dusting at best..came down nice and wet, decent size flakes......

 

[Russ]

Better contact the AAIDD for some help

 

[tonkadoctor]

Found ya. Nice build!! BTW the other site has been shut down.

Welcome, I saw Bud killed it.

 

[tonkadoctor]

Got laid off ...again! ...mebee I should join a union

Whachagonnado..... Go on strike till I feed ya 3 samiches....... Or complain to yer commmity man....... WW

 

[tonkadoctor]

Better contact the AAIDD for some help

BWAAAAAHAHAHAHA

 

[tonkadoctor]

I just wanna see that new driveline in and track straight going down the road

I'm gonna let Mike fiddle with the brake line extensions etc.....till it's time to cut the 8 deg beaver tail and weld up the deck and stinger and 5th wheel mount.

Dropped the driveshaft off today and ordered new rear shocks. Shocks were $137..........

Driveshaft quote was $1200.00 Should be able to pick up both on wednesday.

 

[geonc]

Better contact the AAIDD for some help

They have offered me a charter membership

 

[geonc]

Dropped the driveshaft off today and ordered new rear shocks. Shocks were $137..........

Driveshaft quote was $1200.00 Should be able to pick up both on wednesday.

...there went that budget

guess my profit sharing and retirement went out the window too ;p

 

[tonkadoctor]

...there went that budget

guess my profit sharing and retirement went out the window too ;p

Oh Hail Geo, don't worry about profitsharing and retirement. All I have to do is hop on my private jet and fly to washington to get our share of the bailout money.

Yea I figured it was gonna cost $1000 - $1500. That quote includes 2 completely new custom shafts, slight modifications to the existing shafts as well as replacing the existing U-joints and carrier bearing.