sieg01

Registered User
Joined
Mar 24, 2020
Posts
81
Reaction score
26
Location
Finland
Hi @ all.
Does anyone have an overview with spare part numbers for Dana 60 rear hubs?
I have the Ford Service Manual for my van but the part numbers listed there, are not much of a help.

I have to replace the inner shaft seal of the hub https://www.oilburners.net/threads/one-rear-brake-locks-up.91995/
But when I'm already opening the hub, then I would like to have the other parts next to me - just in case. Or - better, I would like to have the spare numbers, so I can walk in a local store to grab the "missing" parts if necessary.
 

u2slow

bilge rat
Joined
May 8, 2007
Posts
1,827
Reaction score
817
Location
PNW
Aside from taking apart and checking, you'll need the BOM number off the axle and you can get a spicer number from the catalog. Then cross over to other brands.

Google for the spicer X510-9 pdf document. I can't make a link work.
 

sieg01

Registered User
Joined
Mar 24, 2020
Posts
81
Reaction score
26
Location
Finland

Thanks.
I opened the site and with it I got here:

spicer X510-9 pdf document.

Thanks. I found the document.

With the doc I found the seal on page 176 position 34 in the drawing.
Using the BOM 605639-1 and going on page 187, I get the part number "46004".
When I now search for this number then I end up here:

To me a drive-shaft is something else than a inner shaft seal.

What now?
 

sieg01

Registered User
Joined
Mar 24, 2020
Posts
81
Reaction score
26
Location
Finland
My googling shows 46004 has been superseded by 47507.

Thanks!

Why do we need to find this info on a different website and with another company?
I would expect, that the manufacturer is keeping his data updated for his products.

dennysdriveshaft.com says that it is "Exploded View Diagram Number 32"
In our X510-9 pdf it is number 34.
Does anyone have the link to their exploded view?
 
Last edited:
Top