Powerstroke ZF5 to a IDI truck?

frankenwrench

overkill is under rated!
Joined
Oct 8, 2017
Posts
843
Reaction score
490
Location
Weatherford tx
Okay. Last question I do have a idi flywheel but don’t have the bolts that go into the crank. Any idea on where I could find those online
Not off the top of my head but in the tech section it has basically every part number and size known to these trucks. Il take a look
 

Christopher Cline

Full Access Member
Joined
May 15, 2019
Posts
66
Reaction score
11
Location
Washington
Not off the top of my head but in the tech section it has basically every part number and size known to these trucks. Il take a look
Perfect I appreciate it
I’ve never done this before and was just wanting to run this by you. Idi flywheel Powerstroke clutch and pressure plate?
 

frankenwrench

overkill is under rated!
Joined
Oct 8, 2017
Posts
843
Reaction score
490
Location
Weatherford tx
Honestly never tried that. Did the pressure plate for an idi as well as flywheel and clutch disk and throw out bearing. Just the powerstroke transmission. Some of it may work from the powerstroke, but I don't know it for a fact other than the transmission itself as well as the starter. But the starter is another topic. As for the question at hand, I used a luck clutch single mass flywheel and clutch disk and pressure plate for an idi.
 

Christopher Cline

Full Access Member
Joined
May 15, 2019
Posts
66
Reaction score
11
Location
Washington
Honestly never tried that. Did the pressure plate for an idi as well as flywheel and clutch disk and throw out bearing. Just the powerstroke transmission. Some of it may work from the powerstroke, but I don't know it for a fact other than the transmission itself as well as the starter. But the starter is another topic. As for the question at hand, I used a luck clutch single mass flywheel and clutch disk and pressure plate for an idi.
Ok haha school me kn the starter you got me worried jow
 

frankenwrench

overkill is under rated!
Joined
Oct 8, 2017
Posts
843
Reaction score
490
Location
Weatherford tx
No worries, the first gen psd starter is the same and can be used on an idi. Having issues on finding the bolt specs for the flywheel. Hopefully someone chimes in with better knowledge than I on that particular matter
 

Christopher Cline

Full Access Member
Joined
May 15, 2019
Posts
66
Reaction score
11
Location
Washington
No worries, the first gen psd starter is the same and can be used on an idi. Having issues on finding the bolt specs for the flywheel. Hopefully someone chimes in with better knowledge than I on that particular matter
Thank you you saved me a massive headache haha
 

Forum statistics

Threads
91,217
Posts
1,128,497
Members
24,045
Latest member
Ramtough01
Top