Crash-harris is right, here's a link in case you want to read up on it.
http://www.ford-trucks.com/forums/1156489-how-to-3g-install-for-83-92-idis.html
So what did you do with your truck today?
- Thread starter GOOSE
- Start date
Crash-harris is right, here's a link in case you want to read up on it.
http://www.ford-trucks.com/forums/1156489-how-to-3g-install-for-83-92-idis.html
shawn deere
So many wrenches, so little time...
Pulled a big round baler home! (35 miles)
You must be registered for see images attach
Replaced my sway bar "bushing" singular, not plural...
Apparently when you wait about 100k miles too long to change them and one falls out they mutilate the bracket too....
I got it bent pretty close with the vise and a 3# sledge. It's GOTTA be better than it was!
Also put new lock knobs (the things that stick up from the door by the window) so I can actually grab onto them and unlock them if I need to.
You must be registered for see images attach
You must be registered for see images attach
Apparently when you wait about 100k miles too long to change them and one falls out they mutilate the bracket too....
You must be registered for see images attach
I got it bent pretty close with the vise and a 3# sledge. It's GOTTA be better than it was!
Also put new lock knobs (the things that stick up from the door by the window) so I can actually grab onto them and unlock them if I need to.
79jasper
Chickenhawk
I just pull the inside handle. Lol
But with a crewcab, I could see that being a issue.
Sent from my SAMSUNG-SM-G935A using Tapatalk
But with a crewcab, I could see that being a issue.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Yeah it's got power locks but the actuators are all seized up. I already removed the front two. Driver's side back won't lock and my knee keeps hitting the darn lock button and once in a while the passenger rear will actually work and lock on me.
I might actually fix the power locks if I can find a way to move/bypass the switch right next to my knee!
79jasper
Chickenhawk
Ah, yeah.
My brother had a 93 crewcab, it got to where couldn't even pull one up with pliers. Lol
Sent from my SAMSUNG-SM-G935A using Tapatalk
My brother had a 93 crewcab, it got to where couldn't even pull one up with pliers. Lol
Sent from my SAMSUNG-SM-G935A using Tapatalk
The only firestarter was the 2G with spade connectors for the output.
catodd
Registered User
You must be registered for see images attach
Finished my hydroboost conversion.....wished I would of done this years ago, have awesome stopping power now. Installed new Beru glow plugs too.
GOOSE
Happy IDI'er
Very productive weekend. Here's a quick list of what got done.
Repaired a burnt section of power window and door lock harness on drivers side where it enters the door chase.
Fixed the wire that feeds the passenger door window.
Reattached the bottom piece of metal to the passenger door window. And reattached everything with 5 minute epoxy.
Replaced all 4 power door lock motors. I disassembled Two of them and swapped out the rod for the rear door locks.
Installed to new front door speakers
Glued the rubber pad to the w brake pedal.
Put seat covers on the front seats
Put the aluminum diamond plate protector back on the tailgate.
Vacuumed the interior
Topped off the oil
Cleaned out the bed
Cleaned out and reorganized the toolbox.
Was a very productive weekend. I also managed to watch my daughter play two lacrosse games of which she won both, got the quads out for the kids on both Saturday and Sunday and we tented in the back yard Saturday night
Sent from my 0PJA2 using Tapatalk
Repaired a burnt section of power window and door lock harness on drivers side where it enters the door chase.
You must be registered for see images attach
You must be registered for see images attach
Fixed the wire that feeds the passenger door window.
You must be registered for see images attach
Reattached the bottom piece of metal to the passenger door window. And reattached everything with 5 minute epoxy.
You must be registered for see images
You must be registered for see images
Replaced all 4 power door lock motors. I disassembled Two of them and swapped out the rod for the rear door locks.
You must be registered for see images
You must be registered for see images
You must be registered for see images
Installed to new front door speakers
Glued the rubber pad to the w brake pedal.
Put seat covers on the front seats
Put the aluminum diamond plate protector back on the tailgate.
Vacuumed the interior
Topped off the oil
Cleaned out the bed
Cleaned out and reorganized the toolbox.
Was a very productive weekend. I also managed to watch my daughter play two lacrosse games of which she won both, got the quads out for the kids on both Saturday and Sunday and we tented in the back yard Saturday night
You must be registered for see images
You must be registered for see images attach
You must be registered for see images
You must be registered for see images
Sent from my 0PJA2 using Tapatalk
Hauled an old 351W block to a guy who wants it to rebuild it, gets it out of my hair since I won't need it.
Got home and noticed I had a bad tire (broken belt, nice bulge in the tread).
Picked up a warranty exchange starter for her and got the tire switched out and the starter too.
Ordered a couple locks, a brake hose, and a reseal kit for my power steering pump that leaks like crazy.
Got home and noticed I had a bad tire (broken belt, nice bulge in the tread).
You must be registered for see images attach
Picked up a warranty exchange starter for her and got the tire switched out and the starter too.
Ordered a couple locks, a brake hose, and a reseal kit for my power steering pump that leaks like crazy.
pafixitman
Registered User
Sadly I just looked at mine! New student orientation at Millersville University all day Saturday with Doug (the ex actually came this time) My new GPC showed up this weekend so I will try to get to it after work one evening.
Used it to haul a trash water pump home to empty the flooded basement... Ugh.
Finally got my factory shifter handle in the mail from another member here, got it wire wheeled and repainted. Hopefully I can install it later today if it dries quick enough!
Also touched up the tailgate on my other truck... Then promptly forgot and sat on the bumper and.... Leaned on the tailgate....
Oh well, enough excitement for one day lol
You must be registered for see images attach
Finally got my factory shifter handle in the mail from another member here, got it wire wheeled and repainted. Hopefully I can install it later today if it dries quick enough!
You must be registered for see images attach
Also touched up the tailgate on my other truck... Then promptly forgot and sat on the bumper and.... Leaned on the tailgate....
You must be registered for see images attach
Oh well, enough excitement for one day lol
I took chip truck out for a drive.I haven't taken her out since.......since........
