Search results

  1. C

    F350 auto hub slipping/grinding noise

    Thanks for the info guys... I really don't want to go manual as I don't want to have to get out to lock in the hubs, but really how big of a deal is that! So, I will do a little more checking out of the auto-hub situation, but if they are toast and I want to go manual, do I need the warn...
  2. C

    Blown Headgasket/s

    Great replies guys... Just what I was looking for. The truck starts, runs, and drives great and I haven't seen a loss in coolant so I will assume everything is OK for the time being. I also know there are several folks who run the "silver" additive to the coolant which can help stop the tiny...
  3. C

    Blown Headgasket/s

    About a year ago, unknown to me, my waterpump had started leaking and I ran low on coolant. Driving down the road one day I noticed the temp gauge was almost pegged. I pulled over and let the truck cool off, added some coolant and resumed (at this point I still hadn't found the source of the...
  4. C

    F350 auto hub slipping/grinding noise

    On my 94 F350 with factory auto-hubs when I shift into 4wd I get a slipping/grinding noise from the drivers side hub and it seems to not fully engage in 4wd. If the truck is unloaded and and on flat ground it will eventually kick in, but it seems as if its under a load it just slips and never...
  5. C

    Rust Proofing YES!

    Yes, powdercoat and POR, Rustbullet, Master Series, and the others all have the same problem...they are hard, become brittle, loose adhesion, and then trap moisture. Epoxy primer, then paint is the best option that you have.
  6. C

    Rust Proofing YES!

    As someone who owns a paintshop I will chime in... There are a few things you need to know to help you in the process. 1. POR 15 is not a great solution, all it does is encapsulate the metal forming a protective barrier that will peel, crack, fail sometime down the road. Of the several...
  7. C

    diagnose blown head gasket

    What are a couple of the best ways to check head gaskets on our idi's? Normally I would do a compression check, but I don't have a gauge that will check that high of psi. I also know that I have a pinhole leak in the radiator so I don't think I can do a radiator cap pressure test??? Just...
  8. C

    possible to pull engine and trans todether F350 zf5 4x4

    If I removed the front clip is there any problem with pulling the engine and trans together as one unit. I will use the front end loader on the tractor to remove it so I am not worried about the weight, just the feasibility. Any tips/tricks that you want to recommend are appreciated as well...
  9. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    cbarm- yes I still have the truck. If you are interested in parts just give me a call 573-682-4699. Thanks Cole
  10. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Just a bump... I still haven't gotten this truck to the scrap yard, too many good parts and not enough time to get it scrapped during business hours. If you need a part off of here just let me know. Prices are still reasonable and the best way to get a hold of me is still by phone (although...
  11. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Fenders in great shape Doors in great shape Sliding rear glass Cowl Truck has great brakes and calipers Brake booster/ MC Dually hubs Zf5 2wd complete swap Low mileage engine Posi 4:10 sterling rear Just thought I would mention some parts to see if anyone thinks of anything they...
  12. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Also, if anyone needs a good front fuel tank this truck has a brand new one. I hate to scrap a new tank... 573-682-4699
  13. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Sorry for the late replies, been traveling. If you want anything or have questions please call 573-682-4699. Again call if you have questions or need something. I will be scrapping the truck next Monday or Tuesday so I will need to know ASAP. danman004 - fenders are rust free and in good...
  14. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    OnDaRoad - I mean exactly that, and I mean I won't work for an hour under the dash to get you a $15 part. I am parting the vehicle out, but my time is worth money as well. I think everyone understands what I mean. I just wanted to ensure that someone didn't get upset when I said no to sending...
  15. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Sorry guys, I have been crazy busy for the last few days. I will get things checked out and respond to everyone today. Thanks Cole
  16. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    opusd2 - sorry I didn't get your message. The console is yours along with the tach sending unit (it's brand new). Call me for price and details.
  17. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Iowa73 - The hood has a dent in the front, but if you wanted it I could fix the dent (I own a bodyshop). There is no front bumper but everything else is there. If you just wanted the fenders and core support we could do that too. Just let me know, best to call.
  18. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    jlwoods99 - A 92 has a different dash than 91 and earlier. I will let you know about the cup holders if the other guy doesn't want the console.
  19. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Guys, Feel free to PM me an offer on parts or give me a call. Everything will be priced reasonably, but please take into account the effort that it takes to remove an item from the truck (ie... I'm probably not going to spend an hour removing a 5 or 10 dollar part). This comment is not...
  20. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Sorry, I also have the tank switching valve/switch.
  21. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Center console is still there. Truck does have a sliding rear window (not sure about metal clasp). Tach sending unit is BRAND NEW, I put it on the truck 20 miles before trans went out. I don't mind shipping anything if you don't mind paying for it (and appropriate shipping materials if needed) :)
  22. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Sorry for the dirty condition of the truck... just a parts truck and I haven't cleaned anything. The door panels are nice once cleaned up. Most of the interior is clean other than a tear in the seat bottom of the driver side seat.
  23. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    JustinRay - Here's a pic of one of the armrest's and each door panel. Just a pic of one of the front wheels with brand new tires (31 miles on them)
  24. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Iowa 73 - It does have AC.
  25. C

    Parting out 91 F350 DRW extended cab 7.3 IDI (located near Columbia, MO)

    Iowa73 - Core support is in real good shape (no mentionable rust). The truck is brown. justinray - The truck is power windows and locks, I don't mind selling the armrests... I live a good distance from any shipping facility so it's almost impossible for me to give up front shipping costs...

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,764
Members
24,098
Latest member
William88

Members online

Total: 761 (members: 6, guests: 755)

Share this page

Top