finally had to brake down and buy the oil hose, racing season is here.replaced the hose and ends.but back to the high pressure fuel return,where i broke it off at the two bolt flange.the threads are in the the brass nut.so i cut it off and now i there is not enough room to turn the flaring tool...
ok i got the braided line off pin hole leak,what was the special removal tool?it came off with a 3/4 open end wrench.well i hope international has this hose.the local ford dealer want $153.00 its a 12 inch braided hose? the only weird thing is it has different ends.thanks again.
thanks to all iam at work but will get outside its warm tonight(26F) in the next hour and try and remove the hpop hose from the pump to the head the ford dealer said $153.00 for one hose and $137.00 for other.i figure i should change both but one is definitely blown.i run sprint cars and the...
PLEASE HELP.blown braiden line going to head from hpop
well working in 15 degree weather outside i found the line leaking heavily.so is this holding out the glow plug sequence?this is where i was thinking the ipr was stuck.this a great safety feature to save my engine.ie no oil pressure at...
i just ordered a fuel press.relief housing from dieselorings.com.i cant test fire till i fix the broken one.can i make my own block off plate will the truck drive with this blocked off?i would like to drive truck home before the parts come getting sick of working on truck at work.i did the high...
fuse 30 is not blown.and yes the low press.transfer fuel pump turns on and is pumping when the key is on.i busted of the fitting on the return for the fuel bowl.so i must find a new part it looks like cheap white metal.
thanks bigrigtech yes the tach bounces up to about 300 up and down while cranking and no white smoke i have had it in a heated bldg.and did not smell a thing.and the scanner did not have a capability for cranking speed or i could not find that option.but i mean its not even trying to start i...
follow up after scan with snap-on tm 2500.
hello here are the codes p1393glow plug circuit low inputbank 2 (LT).p13911(1.)p1000system check incomplete.p0603 internal control mod kam error.my friend that let me use the scanner said $600.00 to do the change out the glowplugs,he told me the side...
no start
hello i checked the hpop level its about 3/4 from top,i pulled fuse #9 and changed out the crank positioning sensor,i think that what is called a pointer with a sensor on the crank passenger side bottom.i cleaned all the battery posts and i screwed up i think when i unhooked the...
thanks for all the responses my guys at work think cam positioning sensor?due to the fact that it ran 5 minutes like mormal before stalling out.i will check the hpop level and the oil level to be safe.when i pull the fuel filter cover it is full.thanks again.
hello bought truck last sept.ran great until today sat a week in 20 degree weather started right up idled 15 minutes.drove to work 35 miles 3 am started the truck to warm up for drive home truck was idling so i went back into plant 15 minutes later i go outside and the truck is dead.i went thru...
thanks iam a firm believer in keep it simple the 92 has never failed me ever.the electrical electronic scares me.i like old equip.i am a boiler operator in a 40 year old coal plant.any mechanical thing needs daily attention once you know the vehicle the rest is easy.thanks again.the shiny lariat...
thanks most of the other teams use the toter homes or have converted semis or large cube vans to motorhomes.a few friends tow with the power stroke and they carry a extra cam position sensor.and crank sensor also.and yes it is a verifiable history on the psd.it is just a quick and easy upgrade...
thanks yes the idi is in the 8 mpg range while towing hard.14 with no trailer.i love the old girl but need the $$ to purchase the new one.thanks again.
hello long time lurker very seldom poster.i am a sprint car driver i tow all over the midwest 28 ft. enclosed trailer 10 ft sidewalls.towing with the 1992 f-350 quad cab dually non turbo.i have done all the DIY upgrades.3 inch dual exhaust,huge air intake and air cleaner.enough of blah blah...
thanks about 2 years ago i paid $175.00 to get starter rebuilt i never seen them for diesel trucks before but on race cars i just did buy it now off ebay thanks again.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.