Search results

  1. gamudslinger88

    WANTED: 33-35" tires for greenbeast 16.5 rim

    I have 4 35/15.5/16.5 BF Goodrich MT, 2 have a few miles left and the other 2 are iffy. I will take some pics if interested. I also have a set of 39.5/16/15 TSL swampers with ZERO miles on them. I have a 01 PSD so I have no use for any IDI stuff anymore.
  2. gamudslinger88

    Waste oil problems

    For the whole setup or just the replacement cartrages? I paid 40 bucks for the housing and two filters. Not too bad IMO. Ace hardware wanted 38 just for the housing and 7 for each filter.
  3. gamudslinger88

    Waste oil problems

    Ebay. they are just household water filters, a 10 and a 1 micron. They were 40 bucks or so.
  4. gamudslinger88

    MERCEDES BENZ VIDEOS ON YOUTUBE

    I kept waiting for him to smash the building.
  5. gamudslinger88

    Waste oil problems

    Here is my WMO setup. What do yall think?
  6. gamudslinger88

    Waste oil problems

    I am using a 12 volt Fleabay special, It pumps though its just slow. I thinned it out with 50/50 WMO/diesel and and it pumped alot faster. Do yall think I should thin it out some more? I will be running it in a 2001 PSD.
  7. gamudslinger88

    Waste oil problems

    I have just finished my WMO filter setup and I noticed that its way too think to filter with a 10 micron and a 1 micron water filter when its strait motor oil. I was going to filter down about 30 gallons or so and blend around 5 gallons varius ways until I had it right but its taking forever to...
  8. gamudslinger88

    Free MMO

    Yea me either.
  9. gamudslinger88

    Getting ripped off by machining work?

    Magnaflux and hot tank crank block rods and heads $95 Grind crank $85 or polish is $45 Work heads using old valves with new seals and 1 angle valve job $350 Press rods $45 Bore out 8 cylinders $125 Shot peen rods $60 Freeze plugs and cam bearings install $45 Thats what it run me on my...
  10. gamudslinger88

    Hypermax IDI turbo for sale

    pics added
  11. gamudslinger88

    Gray smoke, rough idle, surging......HELP

    Got her back yesterday, I hava a quadzilla chip, elcheapo intake with a huge filter from Flea bay and a 4" moto blue exhaust turbo back system on the way. I also have a set of guages and a piller pod coming aswell. I got the quadzilla because it was used and cheep but I will save my pennies and...
  12. gamudslinger88

    Hypermax IDI turbo for sale

    As I stated above, The turbo is $1000.00 the truck is $1200.00 obo
  13. gamudslinger88

    Hypermax IDI turbo for sale

    Yea it should from what I have been told the onl difference is the assories for the manual, The up pipes and all should be the same.
  14. gamudslinger88

    Here I am

    Looks like you had a better reaction time than the other guy, Hey 15.5 will smoke most ricers so dont feal too bad.
  15. gamudslinger88

    Hypermax IDI turbo for sale

    I think so. but if you want it then I will sell the turbo and the motor for 1200 plus whatever it takes to get it from point a to b.
  16. gamudslinger88

    Hypermax IDI turbo for sale

    The spare engine was running good when we pulled it, I had limited space in my shop at the time so I left it at my buddys house and covered it with a tarp, long story short I took one of the valve covers off for something and a few days after the wind blew the tarp off (we had a bad storm) and...
  17. gamudslinger88

    Gray smoke, rough idle, surging......HELP

    well the dealership finaly got a chance to look at it and they said that it was the lift pump, They have it running but they have to replace the sending unit in the fuel tank.
  18. gamudslinger88

    Hypermax IDI turbo for sale

    Hypermax IDI turbo for sale -------------------------------------------------------------------------------- I have a Hypermax turbo for sale, bought it off of a guy who had it on his 91 7.3 with 70K on the turbo. There is Very little shaft play, I have heard of guys running theres with...
  19. gamudslinger88

    pressure spring for ps fuel pump

    supposedly its made of a stronger material that will not relax over time. Anyone have any luck with shimming?
  20. gamudslinger88

    Question?

    What about other washable filter companys or is it just K&N? I was looking and fount this, Do yall think the filter is big enough? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=220211517209&ssPageName=STRK:MEWA:IT&ih=012 I plan on having this truck for a long time so I...
  21. gamudslinger88

    Question?

    Sweet, I will put that on my wish list. I just bought a quadzilla 6 position chip from a local guy for 150 so I will use it for now. Next is a custom tynar intake and a motoblue 4" exhaust, turbo back with duals in the rear. The only thing is the dual muffler is larger than the single muffler so...
  22. gamudslinger88

    Question?

    Where do you buy the wildman chips I here everyone talking about. I was also wondering whats the advantage of running a tymar filter setup versus a K and N or comparable setup, other than price.
  23. gamudslinger88

    85 F250 and Hypermax turbo FS

    94 F150 sold.
  24. gamudslinger88

    85 F250 and Hypermax turbo FS

    miles are unkown. Its been sitting at my buddys house and the tarp blew off of it so Im sure it has water in it. Was in good shape when we pulled it but in sure you would have to go through it.
  25. gamudslinger88

    Gray smoke, rough idle, surging......HELP

    Its at the dealership and they are going to make good on it so hopefully its nothing major. Whats this wildman chip I here so much about and how much are they?

Latest posts

Forum statistics

Threads
91,281
Posts
1,129,775
Members
24,099
Latest member
IDIBronco86

Staff online

Members online

Total: 792 (members: 8, guests: 784)

Share this page

Top