Search results

  1. M

    Got a block heater? Use it - it makes a difference!

    I've got mine set on a timer, it comes on around 3 hours before I need to start the truck in the morning. mR
  2. M

    CL find DT360

    http://up.craigslist.org/pts/1837992624.html Found this and thought I'd pass it along. It's in the U.P. of Michigan/WI border region. I e-mailed and he wants $1500 for the engine and transmission and it has 130,000 on it. Not affiliated in anyway...blah, blah, blah. Just thought I'd...
  3. M

    Paging Bob Greenslade....

    Didn't realize we were using CB's on this here interweb thing... :) mR
  4. M

    Chipped a tooth.

    Weld it up and call it good, might as well have both rear tires turning all the time :) mR
  5. M

    The beast "Mutant"

    Please, for the sake of the child in your pictures, either fix that front end lift, or burn that damned thing to the ground... mR
  6. M

    dead transfer case

    Just make sure the outputs are the same. Some trucks don't have the slipshaft output that the IDI's have (or at least my idi's have). mR
  7. M

    Washer Pump Is Weak, Anyone Have One???

    They're like $10 at any autoparts store. mR
  8. M

    How long to glow in single digit temps?

    I usually do 15-20 seconds. Don't forget the afterglow though, helps keep the fire lit if she has problems getting going. mR
  9. M

    cheap C-350 gasser CL find

    I doubt that plow is worth that much either... mR
  10. M

    Moosestang Update

    I'm still working on getting the gears to you. I won't fail you, I promise! :angel: Who knew getting your master's degree would just consume your entire life? mR
  11. M

    This thing needs an IDI in the worst way

    double post mR
  12. M

    This thing needs an IDI in the worst way

    "Ten years ago, a crack commando unit was sent to prison by a military court for a crime they didn't commit. These men promptly escaped from a maximum security stockade to the Los Angeles underground. Today, still wanted by the government, they survive as soldiers of fortune. If you have a...
  13. M

    What does it take?

    Did you have to redrill the springs to move the locating pin? Sky shackle reversal kit for the guy who asked: http://www.sky-manufacturing.com/new/detaproduct.php?id=162 mR
  14. M

    hmmmm marine motor

    There was a thread a while back that detailed a build with marine injectors, turbo, and the pump turned up. According to the guy, he dynoed it and got 300 or so at the wheels (but no dyno sheets were shown). I don't have the link currently, may be someone else knows what I'm talking about and...
  15. M

    Rusty Truck Contest

    My wheeler and my winter beater. If you notice on the blue truck, the cab mount is so far gone, that the floor is sitting on the frame and causing the body lines to not match up. I cut out most of the rust on the wheeler. I did find a bunch of those Zebart plugs they put in when they rust...
  16. M

    EB blinged out IDI

    I dig the thing. Would have to change the interior and add zf, but I like it. mR
  17. M

    ok,who is this....I know you gotta be on here...

    Holy Bumper! Also looks like it was drove through a JC Whitney catalog, but to each their own. Respectable looking rig for sure. mR
  18. M

    Why Are Two-Piece Rear Driveshafts Needed?

    Might just try to extend one first. Get a donor driveshaft to use for some tubing, grind off the welds at one of the yokes, pound it out, and weld in the new piece to extend it. You obviously need to be extremely careful here to make the cuts all straight and welding it back together. I've...
  19. M

    Sub-Zero cold start video

    Might try glowing her a little longer and she might have started first try. When it's really cold out, I'll glow mine for 10 seconds to get it to light. mR
  20. M

    2.5 ton Rockwells for sale on CL

    Guy is way high on the price for the axles. mR
  21. M

    '84 F250 4X4 front axle?

    The HD44 used regular Dana 44 lockouts, but has a spindle with 8 bolts instead of 6, and 8 lug rotors. I believe the bearings are the same. Also, it has a D50 upper ball joint, but D44 lower, if I'm not mistaken. mR
  22. M

    Mustang or IDI?

    Stang... mR
  23. M

    Better alternator from nationsautoelectric?

    I would try here: http://www.db-starter-alternator.com/ They seem to be a little cheaper than the place you linked to and they have a one year warranty on everything. They also have a 260 amp for the same price as the site you listed. You just need to get a case with 8.25" ear spacing. mR
  24. M

    2010 IDI Rally Blog and Truck Died

    How about an article/test/review of the moose pump and injectors? I'd like to see some actual before/after dyno numbers from them. I'm going to do a writeup on setting timing using the ferret adapter and adjustable timing light. I don't know if it will be good enough for a magazine, but it...
  25. M

    Resistor pack... where?

    Where is it at under the dash on the 80's trucks, Mel? I need to investigate mine also. mR

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,741
Members
24,098
Latest member
William88

Staff online

Members online

Total: 606 (members: 10, guests: 596)

Share this page

Top