Search results

  1. 9

    compatibility help

    Also forgot to mention I'm working with 2wd trucks only.
  2. 9

    compatibility help

    I was planning on buying the clutch/brake petal assembly off eBay. There are a few brand new motorcraft ones for sale. Also was going to get pre bled mc/sc with line. Thanks for answering all unknowns so far. Will keep everyone posted as work progresses.
  3. 9

    compatibility help

    If the slave cylinders work for either transmission then I would assume Im golden on buying the clutch mc/sc setup for my body style(93) and mounting the t19 behind the 7.3 Correct? Another dumb question: Did Ford add anything to the auto trans steering column that is in the way of installing...
  4. 9

    compatibility help

    I know i've read the answers i seek on this forum in the past, but for the life of me i cant seem to find it now that Im looking for it. Sorry in advance for asking it to be repeated. Can the clutch master cylinder from an 83 be made to fit on a 93? Or could the slave cylinder for a zf5...
  5. 9

    For Sale 6.9 engine

    I am trying to see if there is any interest in a 6.9 engine I would like to sell. It came out of a 1983 F250. Currently it is partly disassembled. (and will be sold this way) Cylinder heads are removed as well as everything above them. Has been sitting indoors with plastic covering engine...
  6. 9

    idi resurrected from the dead and saved from the scrapyard

    Cleaning the interior out I discovered all of the original factory owners manuals in the glove box along with the original owner warranty card and get a load of this; the WINDOW STICKER. WOW!!!! The truck has spent its entire life with in about 35 miles from the dealership it was bought from...
  7. 9

    idi resurrected from the dead and saved from the scrapyard

    Its been a while since ive been on here. Needed to get a truck running and decided that both price and time constraints the flatbed wins out. Should be back on the road legally by next week. Its an 83 f250 former 6.9 now 7.3(with 327000+ miles) t19 2wd. Was going to the scrapyard or getting...
  8. 9

    t-19 rebuilding hard to or not?

    How hard is it to rebuild a t-19? Any special tools or tricks i need to be aware of? Best place to get parts or best prices? Im going to rob the 4 speed out of the 3/4 ton and replace the junk e40d in the 1 ton. The t-19 works just wore out, have to hold it in 3rd or it pops out, and...
  9. 9

    ip wrench part number?

    Thank you all for sheading some light on the subject. I now know who I have to track down to get what I need. I am trying to reinstall the pump and I have the last nut on as far as I could with what I have in the tool box but decided to purchase the correct tool to finish the job right...
  10. 9

    ip wrench part number?

    I hate to make a new post to ask this question but 5 days of looking for the answer has led to nothing. What is the Snap-On part number for the wrench to tighten up the nuts on the ip? (The ones that are hard to access on the back side of the ip gear housing) Snap-On man comes in to work...
  11. 9

    Crew cab rear AC

    Yes i did add the amount of oil it called for and i had a family friend pull it down at his shop with his snap-on vacuum pump. (Wish i had the money to buy snap-on lol) Thanks for the advice on the fan clutch. I think it is time for the electric fan upgrade.
  12. 9

    Crew cab rear AC

    RLDSL Thanks for the reply back. When i replaced the ac system there was allot of trash by the orfice tube and grey goo as well so i replaced the compressor, condenser, liquid line, orifice tube, evaporator, dryer, and return line which has the pop off valve on it. So the entire system is new...
  13. 9

    Crew cab rear AC

    This thread is what I have been looking for. I had the same idea and removed a very similar rear ac unit out of our 94 e150 conversion van we got rid of along with every other piece of the conversion and some factor ford parts. Was wanting to fit it in my 93 crew cab when I redo the interior...
  14. 9

    What would you do?

    Let me add another question. One of the prices on the list is for a truck with a/c and one without a/c. Is the size for the on with a/c taller than it is long because my spare out of the 92 was for a truck with a/c in that year. And if so can I just go find a 83 core support out of a truck...
  15. 9

    What would you do?

    Working on getting the flat bed truck back on the road after the one ton trans went out again.(Flat bed is a 83 f250) Needs a radiator and have a few options. First get the old one repaired(fan clutch spun off and fan took out a small chunk one row deep), radiator shop in town says just...
  16. 9

    E4OD is going out again, have a few questions

    Well went to work today and trans was slipping good, limped it home afterward and parked it. Will have to wait on its 5 speed swap latter. I now have two E4OD boat anchors that will most likley be going up for sale. (ha ha but it's not that funny) Time to fix the flatbed truck, at least it has...
  17. 9

    E4OD is going out again, have a few questions

    The background on this: First e4od puked its fluid out all over I70 near Columbus OH. Lost fluid and overheated. Got truck home, put used trans in out of the 3/4 ton parts beast. Trying my luck with it, it has worked fine for 2500 miles, and now it is starting to shift hard from 1st to 2nd...
  18. 9

    Thinking of making body panels - opinions?

    Hi: I like this idea very much. One question though, you low blow the dually fenders and rightfully so, but could you make these as well and would they hold up any better. (You see alot of duallys with trashed out fenders.) An idea on the weather proofing. Could you use a trunk gasket like on...
  19. 9

    Mid-upper RPM range seems "flat"

    Not trying to hijack thread but most of the people on this site talk about a "moose pump". What is this pump all about and where do you get one/ how much? Have been reading on this site for over a year and a half and have not seen any details about one just people wanting one.
  20. 9

    Has anyone installed a PSD alt on an idi?

    Hi, after reading the 130 amp alt install on the idi tech articles(about four different times) I went looking on ebay for parts for all types of 7.3's (idi and PSD). I came across a 130 amp PSD alt for about 80+15 shipping with no core charge.:thumbsup: I went over to my buddys house this...
  21. 9

    First Long (200+ miles) in my 6.9l running 100% WMO

    I have a question: If you run wmo in one tank and #2 in the other, using the tank holding #2 to start and stop on, would the wmo going through the fuel return system mix in with the #2? Or would it not make any difference?
  22. 9

    IT WONT STOP SWEEKING please help!

    They only do it when you drive around and NOT on the pedal. Once you push the pedal they stop and they really do stop(locks up rear wheels under hard braking).
  23. 9

    IT WONT STOP SWEEKING please help!

    The rear drum brakes wont stop sweeking. A little back ground on the problem. After changing the transmission that dropped out of it back in Dec the brakes(rear) started sweeking and have not stopped since. Have not drove the truck very far for this reason or hardly at all for that...
  24. 9

    engine swap input please

    Thanks for the comments so far. I am keeping the "junk" e40d and tc (came out of the 1 ton when it went man down, 3/4 trans came through) I'm trying to help get my friends truck up and running so thats why I'm giving him my spare 7.3 and scraping the rest of the truck after removing...
  25. 9

    engine swap input please

    Well after much parts swaping my friend and I have determined that his 6.9 has a major valve problem. We are going to swap it for my spare 7.3. We would like to know anyones tricks, recommendations, or two cents in performing this task. Plan on using a front end loader on a tractor for engine...

Latest posts

Forum statistics

Threads
91,376
Posts
1,131,348
Members
24,174
Latest member
MadScientist

Members online

Total: 416 (members: 3, guests: 413)

Share this page

Top