Search results

  1. M

    banks big head

    The big head will not increase power over stock, without a computer mod. IT will not help spoo-up, it will not help overall, or peak boost. The Factory WG is more than good enough for even 100HP over stock. Merrick
  2. M

    mad ecm & antistall

    My ECM I guess has the antistall in it... It lugs down really easy. In 1st gear, going up a curb, the truck will stall. The best thing to do with a grabby clutch is to treat it like a gasser. Rev it up to 1,500 and while you are letting the clutch out, let the RPM fall down to idle so that...
  3. M

    Problems with Edge Comp box

    You are probably Overfueling. The Sublevels are to adjust low boost fueling levels. Take the truck out, and run it on 5x2 and see how much more speed you pick up. 4x3 might be faster on your truck If you are familiar with 12V's, Sublevels are exactly like adjusting the AFC. Merrick
  4. M

    Thunder In Muncie

    S&J wouldn't hook up, the trailer would hit the rear window. We towed with my 3500 until the oil ran out, then, I towed the Diesel Innovations trailer with S-n-J to Houston, then home with my 3500. It was a broken piston ring, or cracked Cylinder. Putting the new motor in it right now...
  5. M

    Blown head gasket, or ??????????

    What does your water temperature do? Does it climb easily with high EGT? Does the truck smell like coolant? After a hard run is the overflow bottle full and Bubbly? Does your Radiator hold pressure? There are times that the head is only lifted for a moment, but settles right back...
  6. M

    Ya Gotta Like This

    My truck is a Dodge, so it's the smallest shaft shown, but, I was around 400-450,, but it wasn't the HP or TQ, it was thte Peak TQ during a locked shift that did it in. Merrick
  7. M

    Ya Gotta Like This

    Having broken a input shaft, I know they are a weak link in high HP trucks. When I called about one, and they were in stock everywhere, and were bringing in a Premium. $600-$800. To replace one, you have to tear down the tranny until it's bits and pieces. Last time I talked to ATS (about...
  8. M

    Ya Gotta Like This

    Chevy, Ford Dodge input shafts? The Dodge input shaft is definatly a weak link. Needs a Billet. Merrick
  9. M

    Anyone from Texas?

    Yah,, sweet. My normal plan is to head up to Houston at 10 or so (putting me there at 5-6pm), and take a break there for a little while, and we leave Houston in the late afternoon. Then drive straight through to Muncie, Indiana. Last year we arrived in Muncie at 1am the next day, and I...
  10. M

    Anyone from Texas?

    I'm in Tx. About 3 hours south Of San Antonio though. I don't get out very often. I plan to make it to May Madness, and Thunder in Muncie. I'lll try some events in Tx, but I'm not into the girl stuff,, (I have a great one here at home), or the beer drinkin/clubbin'. I dunno, just not...
  11. M

    Thunder In Muncie

    We drove untill just outside of mUncie, untill the truck ran out of oil, then switched vehicles, and hooked up Stacked n Jacked up to the trialer, and towed 900 miles to home (which de-arched the rear springs quite a bit) and from Houston to Laredo, I think about 400 miles, it took ~8 gallons...
  12. M

    power pup group buy

    I sell them for $350-355 but, the clincher is in the upgrade.... Merrick
  13. M

    non-wastegated housings

    Sorry buddy, I'm running a Hybrid HX-55 on my 24V, and a Hybrid '55 and a Hybrid HT4C on my 12V. I sold my OE HX-35 a long time ago. I do have an HX-40/18 and HX-40/16 w/downpipes and all gaskets for sale, competiton built, fresh rebuilds, and under 1 grand to the door. Merrick
  14. M

    turbos

    A B-1 KwikSpool will do wonder's for your 2.4's You'll see 48PSI or so, fast spool-up, and a dent in your wallet. It's a great single turbo. Merrick
  15. M

    Blown head gasket, or ??????????

    What turbo? 45PSI on an HX-35 and it's writing it's last will and testimony. At 45PSI you are well oevr 80PSI backpressure. Would you run 80PSI boost ? You just did. (in theory) What happens is the head actually lifts, and when you let off, it sels back. It could be, you lifted the...
  16. M

    non-wastegated housings

    Smallest non-Wg'd I think is 14, maybe a 12, but smallest, I've heard is a 9cm. '02 and maybe '01's have teh 9cm housing Called an HY-35. Same as HX-35, but with a 9cm housing. Merrick
  17. M

    SCMT? Max Tuner.

    Leave teh SCMT aloone. Spend $175 more and get the real deal's. Like an EZ or somethin'. The SCMT runs hotter, with less bosst, and less power than the EZ. Merrick
  18. M

    Overboost Problem

    ignore 1693, it's useless,, tells you something you allready know. That you have a code. Pressure washer might have given him a short, and it'll fix when he dries it out, or id screwed up his fooler. How much boost is he seeing? on a HO it's 22PSI and then a code. If he set the code at...
  19. M

    Transmission Specialists

    It's probably just the TCC locking and un-loncking. Pull the APPS/TPS wires out of the wire loom, and make sure the battery terminals are clean. Change the fluid and filter in the trans if he hasn't rescently. The Trans in his truck is a 4spd. Trucks shifts in this manner...
  20. M

    Can't find AAM LSD aftermarket, any help?

    Odd as it seems, might want to dry the D-Max section. They've had AAM's since '01. Merrick
  21. M

    Ez Tuner

    Yes. www.edgeproductsinc.com Adds ~70HP and ~140-190?TQ Look for about $475 or so. Customer service is always something that needs to be thought of, not just the price. Merrick
  22. M

    Thunder In Muncie

    I'll be there. Maybe I won't break this year? (I haven't even competed in any events either, LOL) Merrick

Latest posts

Forum statistics

Threads
91,320
Posts
1,130,248
Members
24,127
Latest member
RustyNail351

Members online

Total: 763 (members: 11, guests: 752)

Share this page

Top