Search results

  1. BlindAmbition

    Bullnose IDI Tachometer

    Sold
  2. BlindAmbition

    Free misc parts, you pay shipping - pulleys, coolant elbows, pump gear, 6.9 valve springs

    Serpentine and V-belt pulleys, coolant elbows, timing gear, 6.9 valve springs - Free, you pay shipping.
  3. BlindAmbition

    Bullnose Instrument Cluster bezel

    Decent bezel from my 86 F-250 bullnose. $80 plus shipping
  4. BlindAmbition

    '86 Extended cab project thread

    Finally found a 3.73 ratio SRW 2906 Dana 60 axle for less than a grand (I know they are cheaper elsewhere, I'm the great state of California). Stalled on the intercooler reservoir, the tank leaked from a few spots, either my welding skills aren't awesome or using a random propane bottle from...
  5. BlindAmbition

    ATS 093/Ford factory turbo snail

    I have an intake snail for a factory turbo or ATS 093 setup. $150 shipped to your doorstep. No picture tonight, will add in the am.
  6. BlindAmbition

    ATS 088 Turbo setup

    ATS 088 turbo setup for sale. Turbo has play, needs rebuild. Includes the intake snail, crossover pipe, up pipe setup, turbo itself, and the downpipe for exhaust Located near zip 93551. $700, can ship on your dime
  7. BlindAmbition

    Injection line sets

    I've got many sets of IDI injection lines. Message me with what you need, whole sets or individual lines
  8. BlindAmbition

    Saginaw pump bracket

    Sold
  9. BlindAmbition

    Bullnose IDI Tachometer

    $80 shipped
  10. BlindAmbition

    Saginaw pump bracket

    Saginaw power steering pump bracket for a V-belt IDI. $120 including shipping. Comes with the bolts and the spacer as well, not all bolts shown in photo.
  11. BlindAmbition

    IDI York Compressor mount

    $150, shipping included. York AC Compressor mount for an IDI. Best picture I can find of it installed from this thread by towcat.
  12. BlindAmbition

    Anyone done a large aux c6 trans cooler?

    The truck I bought had a cooler plumbed in. It was plumbed in series with the radiator. First through the radiator and then into the cooler and back to the trans. Not sure if that helps at all. Swapped to a ZF5 so that is all gone.
  13. BlindAmbition

    CDR Alternative Poll - Looking for your feedback

    The banks adapter I have on mine fits 1" hose, if that helps at all.
  14. BlindAmbition

    CDR Alternative Poll - Looking for your feedback

    3 because I am using the second water port on my pump and the other two options would block it
  15. BlindAmbition

    Rockauto "out of business"?

    @sieg01 261001792188101645 Expires 4/19/24
  16. BlindAmbition

    Shocks for 1991 F350 DRW Rear Wheel Drive Stock Height - Bilstein 5100?

    I had the same issue when looking for 5100s for my truck. When I called they offered to look up shocks based on specs if I measured, for what that is worth. I'm doing super duty axle swaps so I'll likely need to take them up on that.
  17. BlindAmbition

    buying fittings for the IP from the hardware store?

    Looked at a few return fittings I have, looks like 1/8 npt to me. Can send one out if you need, send me a message.
  18. BlindAmbition

    '86 Extended cab project thread

    Shouldn't be much at all, if any really. The run is super short, something like an 1/8 of the distance for most air to air intercoolers that folks are successfully using. I'll likely have lower pressures overall by a small margin, like one or two psi, but much denser air. Given it is a 6.9 I...
  19. BlindAmbition

    '86 Extended cab project thread

    Got the intercooler reservoir mounted. Will work on the pump and routing hoses next. 3.4 gallons is overkill but I don't think I'll get heat soak except on perhaps very long drives
  20. BlindAmbition

    buying fittings for the IP from the hardware store?

    Inlet is an ORB/O ring boss, cannot remember the size, maybe 5/16 or 3/8. Return is a standard 1/4 npt I believe.
  21. BlindAmbition

    '86 Extended cab project thread

    Finished the oil bypass setup, got the coolant/windshield reservoir mounted, mounted the fuel regulator setup, clocked the turbo and tightened it down, and installed a CCV/CDR adapter on the timing cover to prep for installing the Mann Provent 200. Will work on installing intercooler reservoir...
  22. BlindAmbition

    6.9 to 7.3 glow plug harness

    I'd get some new connectors and create my own harness connections. Something like a WeatherPak or Delphi or Deutsch connector. Just make sure the pins can handle whatever current you're throwing at it. Here are diagrams for the 6.9 style. If you go to the tech section there are tons of...
  23. BlindAmbition

    parallel turbos

    Found the thread. I imagine you could compensate for higher fuel pressure by advancing or retarding the IP timing as needed. Just be aware that once you go above 8 psi or so it starts changing the IP timing. So my saying 10 PSI is too high isn't exactly correct, just that things change once...
  24. BlindAmbition

    parallel turbos

    10 psi is too high and changes the timing of the pump I believe. My R&D pump came calibrated for 7psi. There is a rather large and in-depth thread of PSI and pump timing, I'm phone posting otherwise I'd link it for you.
  25. BlindAmbition

    parallel turbos

    Might need to run a vent tube to each intake tube, you're only scavenging from half your cylinders otherwise. Most things I read say to run 1", but I imagine you could do 3/4 if you're doubling up. I welded a pipe fitting to the IP cover plate on mine and am running 1" hose, but that is for...

Latest posts

Forum statistics

Threads
91,316
Posts
1,130,202
Members
24,121
Latest member
720Diesel

Members online

Total: 766 (members: 12, guests: 754)

Share this page

Top