Search results

  1. B

    Oil cooler o rings.

    Have been doing many oil coolers on the idi pickups as well as 7.3 powertroke trucks lately. The last several I used permatex tune up dielectric grease on the o rings for lube. I have used many different things over the years, but for what ever reason this stuff is by far the best I have used...
  2. B

    pump and injector cores?

    Anybody buying these? Trying to clear up some space and I have a lot more of this stuff than I realized.
  3. B

    6.9 7.3 oil consumption?

    Have had many of these over the years that burned huge amounts of oil, but never really tried to fix one. Anybody tore down a major oil consumer, and what did you find?
  4. B

    valve stem seals and oil consumption

    Anybody had lowered oil consumption after replacing stem seals? I did a couple 6.9s years ago to try to lower consumption with no change. My 7.3 has been using some oil for along time now and the amount has risen sharply in the last couple years. This has been with very little use of the...
  5. B

    7.3 controller glow time.

    Any body played with different wire/cable size to the gpc to alter glow time? On my truck I get a full 20 seconds (this morning at 20 deg) first cold start. Havent checked voltages or voltage drop to controller, but in theory the factory wiring must be tired, causing volt drop at gpc and long...
  6. B

    in need of 085 cartridge

    Any body here provide one? My local source that I have gotten the last few from claims they no longer can get them.
  7. B

    what 4kw starter?

    what one have you guys had the best luck with?
  8. B

    echlin (napa) new injectors

    I have stated in the past that these were good injectors and readily available....well they still are readily available but good ,not soo much. I have used around 10 sets of these, tested before install, and pressures were good and consistent and the trucks they were installed in still run...
  9. B

    085/088 air filter

    Does anybody have a good part number for this air filter? it is the rectangle shaped box. thank you.
  10. B

    what is this 7.3 idi turbo worth?

    Have a running 7.3 with an 088 kit, that needs: turbo cartridge valve cover gaskets complete fuel system engine is healthy, and under 150k I just need an idea what to sell this locally for. I have a buyer, just dont want to charge him too much for it. thanks guys.
  11. B

    early 6.9 piston cooling nozzles?

    I have a really low mile rebuild 6.9, that two of the nozzles (re used in the rebuild) fell out of. I am looking, but cant find a new set. Anybody know where to look?
  12. B

    delphi injectors, two part numbers??

    Lately the local parts stores have been selling the delphi injectors, and list a different part number for the 93-94 turbo motor. Any of you guys selling these injectors have any thoughts?
  13. B

    6.9 weight??

    Has anybody ever weighed one? Wanting to do a swap, but need to know actual weight before I decide
  14. B

    shifting us gear overdrive

    I have this overdrive behind a t-19. I am having no trouble shifting the overdrive while accelerating, but trying to down shift the overdrive while maintaining speed or slowing down i get a long grind. I am sure I am just doing it wrong. anybody drive this combo often? If you were cruising...
  15. B

    6.9 to zf.. what clutch?

    I recently scored a zf/us gear combo, and it is time for my e4od to leave. Truck will be getting a 6.9 at the same time (with stock solid flywheel) and I cant remember what clutch should be used. truck as it sits now is 7.3 and e4od.
  16. B

    cartridge for 085 kit?

    Any body have a good supplier? I am needing one for my truck, and the wheels have been rubbing, guessing it will be easier to just get a cartridge than rebuild. borg warner part# 166198 to4b98
  17. B

    94 460 mpg

    In a recent trade, I ended up with a 94 f350 4x4 regular cab single wheel. It has the 460 with a c6 and 4.11 gears. This has to be the latest I have seen with the c6. anybody have/have had a similar truck? I am wondering what I can expect for mpg. truck is 100% stock and 214k.
  18. B

    this made me laugh

    probably not many of these around. http://missoula.craigslist.org/cto/3945124145.html
  19. B

    088 fitment questions

    Looking at taking an 088 kit off of a 90 4x4 with a zf and putting it on an 84 4x4 with a t-19. Hoping to be as close to 100% bolt on as possible. Am I going to run into anything t-19 vs zf?
  20. B

    new tires?

    looking at getting new tires, just regular old 235/85-16. I have run the toyo m55 forever, with zero complaints other than price. Now that the best price I can find is 1100+ for 4, I am thinking of trying something else. The three tires I am looking at are, the bfg commercial traction...
  21. B

    94 6.5 poor mpg

    My friend has a 94 3/4 4x4 burb, that has always gotten 13-13.5. The thing runs great and sounds great never any smoke or stink. Is there something with the pump that could cause poor mpg?
  22. B

    97 stroke valve train problems

    Had loud popping out intake, traced problem to #1, pulled valve cover and found both pushrods badly bent. I cant see the lifters really well with the head in place and there is this tin piece in the way also. is the tin the lifter retainer? It looks like the lifters are free to rotate, and I...
  23. B

    another one for sale

    http://missoula.craigslist.org/cto/3299320056.html
  24. B

    crew cab+ super cab??

    I am in need of more seating in my crew cab. I have thought about adding a super cab to the back of the crew cab, and keeping the same wheelbase and building a flatbed. Any body know of pics of this job on the net? I am not much for body work, it would be nice to find some one capable, and do...
  25. B

    craigslist truck

    mailto:[email protected]?subject=1984%20Ford%20diesel%204X4%20-%20wench%20-%20%241800%20(Belgrade)&body=%0A%0Ahttp%3A%2F%2Fmontana.craigslist.org%2Fcto%2F3236386287.html%0A looks like an OK deal,......especially if you are into large wenches

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,764
Members
24,098
Latest member
William88

Members online

Total: 616 (members: 3, guests: 613)

Share this page

Top