For your master cylinder, if you have three brake ports on your existing one then get a master cylinder with cruise control/speed control. If it only has 2 get one without speed/cruise control. Even though my 93 has factory cruise control my master cylinder is the one without cruise control. I...
I followed the advice of the others in this thread and I found a sticky injector. Once I replaced it the problem largely disappeared. It still smokes a bit (10 seconds) on mornings around 20f but no longer shudders. I would also suspect a sticky injector in your case as well.
Thanks Mel. I have the old injectors that I replaced with the new ones a few months before the pump. The new ones worked perfectly before the new pump, I bet I dropped some crud on the injectors when I was replacing the pump. I covered them, but only after I realized they were getting dirty. I...
Thanks for the suggestions, I will go ahead and check the glow plugs. I will also try to check the injectors, but I would only have 3 min or so to catch the problem. Hopefully I can get lucky. What are the symptoms of a broken or out of spec cold timing advance?
I actually moved to memphis TN a few months ago. The truck towed me and my stuff across the US. After I replaced the IP I bought a ferret adapter and timed it to 9.5 btdc.
State: TN
CITY: Memphis
Ferret adapter with timing gun. Best bring your own special wrench...mine isnt the greatest.
Cost: Free, case of beer, donations, etc.
Hey guys, a few weeks ago I installed a new IP from Agnem and it is a whole new truck. However, now with the arctic temps in the south I found a new problem. Starting it in a cold morning produces 3 minutes of intense white smoke and it runs a bit rough (kinda like a miss). But once the temp...
Yup, still in Memphis tn. Was busy today, but I will install the IP tomorrow morning. Got the lines in the mail so hopefully it goes together smoothly.
Thanks Mel for the pump! I am sending the core back today. I got lucky and found a set of lines on eBay for 20.00 in supposedly used but good condition. I only need the line to number 2 cylinder so I should have a good chance.
Thanks Icanfixall. I already have the pump of (without removing gear cover) and I am just waiting for new steel injection lines to arrive. I found one cracked one during the removal process. And yes, I am trying to find someone that can time it to 8.5 btdc but none of the local shops I...
Thanks! I will pm you once I get her running and if I can't find help a bit more locally. She could use a drive though, I took the opportunity to put on a dura lift, coolant filter, redid the brakes and put on new axle seals.
I recently had a series of unfortunate events. I had to replace a ton of parts culminating in a new moose junior pump! I will be installing it this weekend and was wondering if anybody knew of a shop that can time my engine once it starts up. I came around and can't seem to find a shop that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.