Search results

  1. B

    Coil Spring Lengths

    My 05 F250 had DDCC spring code which I think are 5600lb. Does anyone have the uncompressed length? I'm looking for a heavier spring thats about 4" longer for a project. I read the 7000lb coils only give you 1" lift, is that correct?
  2. B

    Relay Wiring

    I figured I'd post this on here since its going on a Cummins. I'm wiring my grid heater. I'll have a 4' long black 4awg going from a ground block to one side of the heater. The other side will have a 4' long red 4awg going to one side of the big lug on a White-Rodgers 120-105111 4 terminal...
  3. B

    Gas tank for Diesel?

    Ive got a f350 460 gasser and put a 12v cummins in it. Ive read people say not to use steel gas tanks for diesel. I was wondering about the electric in-tank gas pumps. My plan was to put new in-tank prefilters on the front and rear pumps and use the stock ford pumps/selector in the cab, to...
  4. B

    460 harness plugs

    I've got a 1997 f350 460 2wd dually cclb auto. I'm working on wiring the 96 12 valve Cummins from a bus. I'm wondering if people could help me identify what the various plugs are for. Passenger side Drivers side- I'll get a better close up photo of the unlabeled plugs in the future
  5. B

    What sensors are these?

    I've begun wiring my 12v for my f350 and am trying to use the factory harness. I'm sure I'll have more questions in the next week or so What are the two sensors here on either side of the alt bracket?
  6. B

    Deutz Diesel Bronco

    Hi I'm in the beginning stages of starting a build. I'm not super familiar with the details of transmission mounting, etc. I have a Deutz air cooled 6L912 inline 6 cylinder which I measured the bellhousing mounting pattern to be SAE #3. I've also got a divorced NP203 from a 203/205 doubler...
  7. B

    Turbo cleaner spray?

    I got some turbo wash liquid with my boat. It's made in Japan, I've got a Yanmar engine. Stuffs like $80 a gallon. Anyways I guess you just put it in a squirt bottle and shoot X fluid ounces into the turbo, under load, over a period of Y seconds. Anyone used something similar on their 6.0? Kind...
  8. B

    12v Stick location

    I'm looking to do a 12v swap and was wondering if anyone could measure the distance from the engine mating surface on the bell housing to the front part of the little box the shifters bolted to as well as the center of the stick in Neutral. Thank you ever so much
  9. B

    OBS Roller

    Long story short is I have a motor and trans, Looking for a 4x4 92-97 F250 or F350 extended cab or crew cab in good shape for cheap. Blown engine or trans is fine. Anywhere from Maine to Florida is fine but I'm thinking further south will be less rusty. Let me know what youve got, where its...
  10. B

    Looking for OBS

    Long story short is I have a motor and trans, Looking for a 4x4 92-97 F250 or F350 extended cab or crew cab in good shape for cheap. Blown engine or trans is fine. Anywhere from Maine to Florida is fine but I'm thinking further south will be less rusty. Let me know what youve got, where its...
  11. B

    Ford 12v

    Hi guys I'm new to Cummins motors. I just bought a factory Ford 12 valve and am pretty excited. I tried searching around and didnt find much. Engine runs great even with no grid heater and it snowing out. I'm wondering what steps to do when I start changing out stuff. Example, when checking the...
  12. B

    No throttle/accelerator pedal

    Hi guys just wanted to share something that happened to me, hopefully itll help someone out. Short version- Unplug the exhaust back pressure sensor. Driver side above the exhaust manifold, below the degas bottle. Follow the silver tube coming out of #2 exhaust up to the pressure sensor...
  13. B

    HELP QUICK 6.0 Gauge Cluster question

    I narrowed down my windows, lights, radio issue to the top right blue connector on the gauge cluster. I was resoldering the pins that go to the blue connector and like an idiot, I didnt take a picture of it beforehand. Is this pin I'm pointing at with a toothpick supposed to be connected to...
  14. B

    Swappin parts?

    Hi all, I'm new here. I have a 1988 F350 SCLB, ZF5, with a banks turbo in it. This things just about all rusted out and the motor isnt in the best shape... but it runs! I just got a 1993 F350 CCLB, E4OD, non turbo. Right now the top of the motor is takin apart. Basically everything above the...
  15. B

    New F350

    Hi everyone I just joined this forum to try and learn as much as I can about my new truck. Any tips, tricks or info is greatly appreciated. I have a truck that I know very little about. Unfortunately its 5400 miles away and I wont be able to check specifics on the truck. My brother will be...

Latest posts

Forum statistics

Threads
91,281
Posts
1,129,766
Members
24,098
Latest member
William88

Members online

Total: 682 (members: 6, guests: 676)

Share this page

Top