Search results

  1. 94f450sd

    Differences between 03 and 04?????

    I have a snap on modis scanner. I dont have the truck anymore.customer has it back.i used his turbo off the old motor.it had some water in the exhaust side.it felt like it spun fine.no excessive up/down,in/out movement. I figured it just needs to be run or his turbo is junk.we will see what's...
  2. 94f450sd

    Differences between 03 and 04?????

    It is.8 had to replace the sensor cuz I somehow broke the nipple off of it.
  3. 94f450sd

    Differences between 03 and 04?????

    Well,round 2 didnt go so well.2nd motor had a dead cylinder.was missing parts. Dropped an injector in it this morning.now hits on all 8. turbo seems weak.its not making any noise till you rev it to around 2000 in park.and even then it dont sound like what I'm used to a 6.0 sounding like,a hair...
  4. 94f450sd

    Egr delete???

    Early 04,had an 03 motor in it.
  5. 94f450sd

    Egr delete???

    So I'd just have to put the valve back on it or the whole egr system? I'm not familiar with the 6.0.im a 7.3 guy
  6. 94f450sd

    Egr delete???

    Ok so,this truck I'm putting a motor in is turning 8nto a hassle.first motor had a bad oil leak.customer found another motor but has the egr delete already done. Do I need him to get a programmer or something to run it? I'd hate to put it in and find out it wont run ir something.
  7. 94f450sd

    Differences between 03 and 04?????

    And it's gotta come back out.oil leak appears to be coming from the 2 half of the block.atleast I know how to get it out and back in now
  8. 94f450sd

    Differences between 03 and 04?????

    Well,it ran.i pulled it outside to let it run for a bit.turned it around and pulled back in cuz of an oil leak.shut it off. now it won't start.acts like it's not getting fuel or the hpo system us dry.according to scanner,1800ish psi hpo cranking over.no codes.
  9. 94f450sd

    Differences between 03 and 04?????

    As far as using the 03 sensor in the 04 location.i dont see how that would work as the 04 icp is sealed by and holds the rubber seal for the valve cover hole.the 03 is sealed with an oring.totaly different shaped sensors as well.
  10. 94f450sd

    Differences between 03 and 04?????

    I put it back in the 03 location.if it becomes an issue down the road I or another mechanic can stretch the wires and use the sensor in the head.
  11. 94f450sd

    Differences between 03 and 04?????

    03-04 did.04.5-up didnt.doesnt need it.they changed intake,up pipe, egr cooler in 04.5,turbo mounting, But supposedly everything will work.we will see tomorrow when I fire it up.
  12. 94f450sd

    Differences between 03 and 04?????

    After some extensive googling.supposedly all I need is the harness to the 04 motor,of course junkyard cut it. But in the case of not having the harness.i need to extend the icpc wires to reach the head sensor or use the 03 sensor in the 03 location.i opted for the 03 setup,let the dead icp in...
  13. 94f450sd

    Differences between 03 and 04?????

    This is the stuff that makes me wanna get out of this business. There was no need to change so much shit in a year.and if they're gonna change it,make it so it fits the older shit.freek8n rediculous!!!
  14. 94f450sd

    Differences between 03 and 04?????

    Ok so my first dive into these piles of crap was going ok till I put both motors side by side to swap stuff. The original motor is an 03.the replacement is an 04. Before I got too deep I found the 04 motor has a sensor in the passengers valve cover,the 03 diesnt.so I pop covers off and...
  15. 94f450sd

    Cp3 pump.

    Ok I have an 01 2500.that won't start.story I got is they put gas in it,it died,hasn't run since.its not pumping fuel.i can prime it,crank it,no start,no fuel out the valve. No fuel coming from the valve while cranking either. Google says the pump is bad.what years interchange???? I've got 6...
  16. 94f450sd

    Dies and won't restart

    Ok so this 05 duramax I'm dealing with will start and it'll run for a while on first start. itll just shut right off like you turned it off.wont restart till it sits for a while.then it only runs a couple minutes before it dies it all over again. I can pump the primer till my hand falls off,no...
  17. 94f450sd

    05 5500 fuel system help needed

    I did get it running.its gotta have a bad injector somewhere as I can hear a fuel knock and it smokes.
  18. 94f450sd

    05 5500 fuel system help needed

    I couldn't find a primer.i found what I think is the filter on the drivers side.has wires going into the top and bottom of it.looks like a plastic housing.cartridge filter?. On top of the motor sorta in the middle I found a brass colored fitting with a Schrader valve in it.this to bleed fuel...
  19. 94f450sd

    05 5500 fuel system help needed

    Ok,I know absolutely nothing about the duramax. We bought a 5500 car carrier.had a motor put in it at some point,ran once and never again. I got it cranking over today.itll fire on ether and die,so it's not getting fuel.gauge says 3/4 tank.not sure if it's right or not,I'll try putting 5...
  20. 94f450sd

    Ebay fuel sending unit.

    This one.i know the picture is right but i wanna be sure as customer needs this truck asap.if somebody has one ill buy it.give paypal info and price plus 1 or 2 day shipping...
  21. 94f450sd

    Ebay fuel sending unit.

    https://www.oilburners.net/threads/ebay-fuel-sending-unit.81263/ I posted in the wrong forum.not sure if i worked the PM thing right.
  22. 94f450sd

    Ebay fuel sending unit.

    Oops wrong forum.
  23. 94f450sd

    Ebay fuel sending unit.

    http://www.ebay.com/itm/1985-1986-Ford-F250-F350-Diesel-Pickup-Sending-unit-for-the-Side-tank-ONLY-/391267800639?hash=item5b1960d63f:g:wTIAAOSwGW9XPgib&vxp=mtr I have an 89 fsuperduty with 19 gallon side tank.i need a sending unit for it.id rather buy off one of you if possible. Is that the...
  24. 94f450sd

    WTB 89 f450 fuel sending unit

    I need a front tank sending unit for an 89 fsuperduty.itll be the same as a pickup with 19 gallon tank.
  25. 94f450sd

    Oil leak advice

    If I remember correctly there are a couple long bolts that go through the pump and cover,correct?(been a while since I tore one apart.) You will seep a little oil out from behind the cover.the top of the cover houses a couple of oil ports. I'd run it.thats not anything I'd be concerned with.

Latest posts

Forum statistics

Threads
91,263
Posts
1,129,513
Members
24,094
Latest member
madmustang1965

Members online

Total: 797 (members: 8, guests: 789)

Share this page

Top