Search results

  1. bleedblueoval

    So what did you do with your truck today?

    Just keeping the batteries charged to get through the cold snap.
  2. bleedblueoval

    Timing question

    Different pop pressure output means different timing. It is best to time with the injectors that you are going to run.
  3. bleedblueoval

    Hard starting issue

    Does anyone know if the schrader valve is inline before or after the filter media?
  4. bleedblueoval

    Hard starting issue

    When was your last fuel filter change?
  5. bleedblueoval

    Charging issues

    You need an amp meter to properly test for load. Use a test light first though. If the test light does light then you are pulling enough amps to blow a standard DVOM. If the test light does not light, proceed with an amp meter.
  6. bleedblueoval

    Replaced transmission now no start help needed

    Check for power to the fuel cutoff switch on the injection pump.
  7. bleedblueoval

    Charging issues

    Did Ford factory install the 3G in the IDI? If so, what year did that start?
  8. bleedblueoval

    Oil Filter makers

    Just to give you an idea of the shear magnitude of that monster, go to google images and type in "powerstroke Donaldson elf7405". The only mentioned issue I have heard of about it is that the solid axle powerstrokes with anti-sway bars tend to bend the end of the filter if you drive it like a...
  9. bleedblueoval

    Oil Filter makers

    Some of the powerstroke guys are running the Donaldson elf7405. Looking at the specs it seems pretty impressive to me. Check it out at...
  10. bleedblueoval

    Any possible way to rig a blowoff valve on an idi?

    Here are my thoughts on it. We run a vacuum pump on the idi's. Why don't you run a line from the vacuum manifold up to one of these http://www.1stopretroshop.com/pneumatic-regulators-line-filters-valves/lot-2-pneumatic-push-button-switchs.htm mounted so when the throttle is released it is...
  11. bleedblueoval

    Ford OE under hood storage/tool box.

    I had an '84 Bronco that had one of those. It was located right where our drivers side batteries sit.
  12. bleedblueoval

    My truck. Oh yes

    Check all of your steering components i.e. tie rod ends, ball joints, etc. before you replace your steering box. Also make sure your rod from your steering wheel down to the steering box is all snug at the connections. -Scott
  13. bleedblueoval

    air bags like a bug truck

    http://kelderman.com/
  14. bleedblueoval

    Truck has a miss at idle and dies

    Change your fuel filter. Easiest and most inexpensive place to start.
  15. bleedblueoval

    Mysterious squeak...

    Stationary squeak. No difference if the clutch pedal is depressed or not. Rpm changes the pitch of the squeak.
  16. bleedblueoval

    Mysterious squeak...

    I bought my first IDI about 2 weeks ago. It has a squeak that is rpm related, i.e. it gets more squeaky as rpm increases. I took off the serpentine belt and checked all of the bearings on the pulleys. The idler pulley bearing was bad so I replaced it but the squeak is still there. The only other...

Latest posts

Forum statistics

Threads
91,276
Posts
1,129,687
Members
24,098
Latest member
William88

Members online

Total: 444 (members: 6, guests: 438)

Share this page

Top